Current Methods of Construction Design: Proceedings of the ICMD 2018

Description

This conference proceeding presents contributions to the 59th International Conference of Machine Design (ICMD 2018), organized by the University of Žilina, Faculty of Mechanical Engineering, Department of Design and Mechanical Elements. Discussing innovative solutions applied in engineering, the latest research and developments, and guidance on improving the quality of university teaching, it covers a range of topics, including: machine design and optimizationengineering analysistribology and nanotechnologyadditive technologieshydraulics and fluid mechanismsmodern materials and technologybiomechanicsbiomimicry; andinnovation Front Matter ....Pages i-xxii Front Matter ....Pages 1-1 Design Optimization of the Octavia SK37x Driver’s Seat—DFMA Principle Application (Pavel Bartonicek, Ivan Mašín)....Pages 3-12 Description of the Methodology of the Automated Optimization Process (Michal Belorit, Slavomír Hrček, Marek Bisták)....Pages 13-20 Innovation of the Cutting Tools of the Modular Production Line for the Production of Sophisticated Adhesive Wound Covers (Martin Dolanský)....Pages 21-30 Mobile Positioning Device Powered by an Electromotor (Filip Dušek)....Pages 31-37 Development of a New Measuring System for Verifying the Float Level Gauge (Tomáš Gajdošík, Igor Gajdáč, Ĺuboš Kučera, Jaromír Markovič)....Pages 39-45 Experimental Methods and Devices for the Identification of the Properties of Pneumatic Dual Mass Flywheel (Robert Grega, Peter Kaššay)....Pages 47-55 Innovation of Device for Production of Core Yarn with Nanofibers (Martin Chára)....Pages 57-65 Bearing Test Rig: Setting up and Lesson Learned (Jakub Chmelar, Pavel Mossoczy, Vojtěch Dynybyl)....Pages 67-77 Reverse Engineering of the Gearbox Case (Lukáš Jančar, Jiří Začal, Zdeněk Folta)....Pages 79-87 Optimization of Driving Comfort of Golf Cart (Radka Jírová, Lubomír Pešík, Roman Svoboda)....Pages 89-94 Creation of a Computational 2D Model of Harmonic Gearbox (Maroš Majchrák, Róbert Kohár, Michal Lukáč, Rudolf Skyba)....Pages 95-103 Trend of Increasing Dynamicity in the Design of Flood Protection Systems (Ivan Mašín)....Pages 105-111 The Gearing Temperature Shock Oscillation (Martin Mazač, Miroslav Malý)....Pages 113-119 The Device for Measuring the Stiffness of the Bearings (Václav Mosler, Jan Pavlík, Jiří Havlík, Ivo Křístek)....Pages 121-126 Comments on ISO 6336-2 (Milos Nemcek)....Pages 127-130 Contact Patterns During a Mesh of a Helical Gear Pair (Jan Pavlík, Václav Mosler)....Pages 131-137 Explanation of New Specifications Used in Geometric Dimensioning Model (Karel Petr)....Pages 139-147 Creation of Calculation 3D Model of Slewing Bearing (Rudolf Skyba, Slavomír Hrček, Lukáš Smetanka, Maroš Majchrák)....Pages 149-157 Design Optimization of Micro-hydro Power Plant (Pavel Srb, Michal Petrů)....Pages 159-165 The Loading of the Crew Protection Structure of the ROPS According to Different World Standards (Ladislav Ševčík, Ha Van Nguyen)....Pages 167-173 Design and Manufacturing of Multipurpose Steering Wheel (Dana Šišmišová, Erik Mikuláš, Stanislav Zeman, Ĺuboš Kučera)....Pages 175-183 Sealing Technology for Vacuum Applications Working by Increased Temperatures (Michal Tropp, Michal Lukáč, Milan Benko, František Brumerčík, Zbigniew Krzysiak, Aleksander Nieoczym)....Pages 185-192 Contactless Measuring Device for Flexible Shaft Coupling Twist Angle (Matej Urbanský, Robert Grega)....Pages 193-200 Profile Design of Groove Cam with Roller Follower (Ha Van Nguyen, Ladislav Ševčík)....Pages 201-211 Geometric Specification of Complex Spatially-Oriented and Compliant Components II (Václav Vaněk, Martin Gorschenek, Roman Polák)....Pages 213-222 Front Matter ....Pages 223-223 Unconventional Carbon Springs (Milan Benko, Ĺuboš Kučera, Tomáš Gajdošík, Michal Herda)....Pages 225-234 Impact of the Spin Cycle on the Acoustic Power Level of a Washing Machine (Marek Bisták, Štefan Medvecký, Michal Belorit, Ján Ďungel)....Pages 235-242 Sensor for In-time Identification of Deep Core Drilling Parameters (Martin Dub, Vojtěch Dynybyl)....Pages 243-249 The Energy Assist for the Electric Car Edison (Igor Gajdáč, Tomáš Gajdošík, Ján Šteininger)....Pages 251-261 Contact Analysis of Selected Toothed Contact of the Two-Stage Front Gearbox (Stanislav Gramblička, Róbert Kohár, Maroš Majchrák, Michal Vrabec)....Pages 263-269 Evaluation of the Energy Balance on Test Bench with Open Power Flow and Closed Power Flow for Testing of Transmission (Michal Herda, Ĺuboš Kučera, Tomáš Gajdošík, Milan Benko)....Pages 271-278 Dynamic Analysis of Vibrating Sorter and Description of Optical Methods for Experimental Verification (Jan Hoidekr, Vojtěch Dynybyl)....Pages 279-285 Modeling of Cornea Applanation When Measuring Eye Pressure (Branislav Hučko, Ĺuboš Kučera, Stanislav Ďuriš, Peter Pavlásek, Jan Rybář, Juraj Hodál)....Pages 287-294 Screw Connections with Application of Modern Insurance Sealants and Adhesives Analysis (Jan Kanaval, Eliška Cézová, František Starý)....Pages 295-301 Measuring Mass Moment of Inertia of a Rotor—Two Simple Methods Using no Special Equipment (Peter Kaššay, Robert Grega)....Pages 303-315 The Influence Long-Term Operating Load to the Riveted Join (Václav Kubec, Josef Hodek, Antonín Prantl, Petr Votápek)....Pages 317-326 Monitoring of the Measurement Process Capability by Using Capability Indices (Ĺuboš Kučera, Jakub Palenčár, Rudolf Palenčár, Stanislav Ďuriš, Ján Vachálek, Jan Rybář)....Pages 327-332 The Digital Twin of a Measuring Process Within the Industry 4.0 Concept (Ĺuboš Kučera, Ján Vachálek, Markus Melicher, Pavol Vašek, Juraj Slovák)....Pages 333-341 FE Analysis of Load Distribution in Clinched Joints Array (Pavel Maly, Frantisek Lopot)....Pages 343-350 Transmission Mechanical Vibrations in the Car Seat in the Laboratory Conditions (Rudolf Martonka, Vítězslav Pfliegel)....Pages 351-356 Safety Models of Systems in the Engine Room with Renewable Elements (Zbigniew Matuszak)....Pages 357-365 Low-Speed Bearings Diagnostic Equipment (Michael Oeljeklaus, Lubomír Pešík)....Pages 367-372 Calculating Strength of Truck-Trailer Frames by Using Software MSC Adams and the Finite Element Method (Adam Przemyk, Andrzej Harlecki, Szymon Tengler)....Pages 373-381 Solution of Damped Oscillations by Coulomb Friction at the Karakuri Mechanism Using MAPLE Software (Tomáš Riegr, Ivan Mašín)....Pages 383-390 The Procedure for Reduction of the Acoustic Performance Level of the Spinning Cycle in the Washing Machine (Ján Šteininger, Ján Ďungel, Slavomír Hrček, Igor Gajdáč)....Pages 391-398 Load Analysis of Ship Generating Sets During the Maneuvers of the Vessel (Dariusz Tarnapowicz)....Pages 399-407 Measurement of Torque and Axial Force on Cardan Shaft (Miroslav Trochta, Jiří Začal)....Pages 409-414 AHP-Based Evaluation of Vertical Gardens Design (Tomáš Vach, Ivan Mašín)....Pages 415-421 Examining the Modal Characteristics of the Prestressed Gearbox (Peter Weis, Milan Sapieta, Peter Bezák)....Pages 423-431 Effect of Temperature on Bolt Working Load of Pressure Vessels (Jiří Začal, Lukáš Jančar)....Pages 433-441 Front Matter ....Pages 443-443 Scuffing Resistance of 16MnCr5 HCR TiAlCN-Coated Gears (Miroslav Bošanský, František Tóth, Ladislav Gulan, Juraj Rusnák, Adam Furstenzeller)....Pages 445-452 Analysis of Tribological Properties of Composite Materials for the Production Designing of Bearing Cage (Jozef Bronček, Ronald Bašt’ovanský, Viera Konstantová, Michal Stupavský)....Pages 453-461 Investigation of the Tribological Properties of the Nitride Layer on Heat-Treated Steel 100Cr6 (Jozef Bronček, Martin Vicen, Peter Fabian, Norbert Radek)....Pages 463-471 Experimental Verification of Tribological Properties of Thin Coatings for Artificial Human Joints (Marián Dzimko, Matúš Kovaliček, Eva Gajdošová, Yoshinori Takeichi)....Pages 473-480 Front Matter ....Pages 481-481 Modular 3D Printer Concept (Róbert Kohár, Marián Stopka, Peter Weis, Peter Spišák, Ján Šteininger)....Pages 483-488 Optimizing Setting of Open Source Fused Deposition Modeling 3D Printer (Silvester Poljak, Ronald Bašt’ovanský, Pavol Podhora)....Pages 489-499 The Comparison of Selected Strength Indicators of Manufactured Prototypes Produced by Metal Additive Manufacturing (3D Printing) System (Robert Sásik, Ronald Bašt’ovanský, Michal Hoč, Rudolf Madaj, Peter Spišák)....Pages 501-508 Study of EDSM for Additive Technology in a Smart City (Radek Teply)....Pages 509-514 Development of Process Parameters for SLM Processing of AlSi7Mg Aluminum Alloy (Josef Zvoníček, Daniel Koutný, Libor Pantělejev, David Paloušek)....Pages 515-524 Front Matter ....Pages 525-525 Control System for the Testing Device of Flood Barriers (Aleš Lufinka)....Pages 527-537 Numerical Simulation of Flow Through Porous Media (Ondřej Novák, Michal Petrů)....Pages 539-544 Front Matter ....Pages 545-545 Principles of Winding Elbows from Pre-impregnated Carbon Fibers (Petr Kulhavý, Vítězslav Pfliegel)....Pages 547-555 Principles of Increasing the Winding Effectivity of Composite Prepregs to Construction Application (Michal Petrů, Josef Vosáhlo)....Pages 557-564 Boiling Heat Flux of Multilayer Mesh Microstructures (Norbert Radek, Łukasz J. Orman, Jozef Bronček)....Pages 565-570 Properties of Steel Welded with CO2 Laser (Norbert Radek, Jacek Pietraszek, Jozef Bronček, Peter Fabian)....Pages 571-580 Determination of Mechanical Properties of FRP by Bending Test (Martina Ryvolová, Josef Vosáhlo)....Pages 581-587 Design of Belt Wheels Using the 3D Printing Method (Patrik Sniehotta)....Pages 589-595 Front Matter ....Pages 597-597 Performance of a Manually Fed Pelleting Machine with a Horizontal Rotating Matrix (Gurkan Alp Kagan Gürdil, Bahadır Demirel, David Herak, Yunus Özcan Baz)....Pages 599-604 Innovation of Device for Nanofibers Production Using TRIZ (Petr Lepšík)....Pages 605-610