ISE Statics and Mechanics of Materials (ISE HED MECHANICAL ENGINEERING)

Description

The approach of the Beer and Johnston series has been appreciated by hundreds of thousands of students over decades of engineering education. Maintaining the proven methodology and pedagogy of the Beer and Johnson series, Statics and Mechanics of Materials combines the theory and application behind these two subjects into one cohesive text focusing on teaching students to analyze problems in a simple and logical manner and, then, to use fundamental and well-understood principles in the solution. The addition of Case Studies based on real-world engineering problems provides students with an immediate application of the theory. A wealth of problems, Beer and Johnston's hallmark sample problems, and valuable review and summary sections at the end of each chapter, highlight the key pedagogy of the text. Cover Title Page Copyright About the Authors Brief Contents Contents Preface McGraw-Hill Connect List of Symbols 1 Introduction 1.1 What Is Mechanics? 1.2 Fundamental Concepts and Principles 1.3 Systems of Units 1.4 Converting Between Two Systems of Units 1.5 Method of Solving Problems 1.6 Numerical Accuracy 2 Statics of Particles Introduction 2.1 Addition of Planar Forces 2.2 Adding Forces by Components 2.3 Forces and Equilibrium in a Plane 2.4 Adding Forces in Space 2.5 Forces and Equilibrium in Space Review and Summary Review Problems 3 Rigid Bodies: Equivalent Systems of Forces Introduction 3.1 Forces and Moments 3.2 Moment of a Force about an Axis 3.3 Couples and Force-Couple Systems 3.4 Simplifying Systems of Forces Review and Summary Review Problems 4 Equilibrium of Rigid Bodies Introduction 4.1 Equilibrium in Two Dimensions 4.2 Two Special Cases 4.3 Equilibrium in Three Dimensions 4.4 Friction Forces Review and Summary Review Problems 5 Distributed Forces: Centroids and Centers of Gravity Introduction 5.1 Planar Centers of Gravity and Centroids 5.2 Further Considerations of Centroids 5.3 Distributed Loads on Beams 5.4 Centers of Gravity and Centroids of Volumes Review and Summary Review Problems 6 Analysis of Structures Introduction 6.1 Analysis of Trusses 6.2 Other Truss Analyses 6.3 Frames 6.4 Machines Review and Summary Review Problems 7 Distributed Forces: Moments of Inertia Introduction 7.1 Moments of Inertia of Areas 7.2 Parallel-Axis Theorem and Composite Areas Review and Summary Review Problems 8 Concept of Stress Introduction 8.1 Stresses in the Members of a Structure 8.2 Stress on an Oblique Plane Under Axial Loading 8.3 Stress Under General Loading Conditions; Components of Stress 8.4 Design Considerations Review and Summary Review Problems 9 Stress and Strain—Axial Loading Introduction 9.1 Basic Principles of Stress and Strain 9.2 Statically Indeterminate Problems 9.3 Problems Involving Temperature Changes 9.4 Poisson’s Ratio 9.5 Multiaxial Loading: Generalized Hooke’s Law 9.6 Shearing Strain *9.7 Deformations Under Axial Loading—Relation Between E, ν, and G 9.8 Stress and Strain Distribution Under Axial Loading: Saint-Venant’s Principle 9.9 Stress Concentrations Review and Summary Review Problems 10 Torsion Introduction 10.1 Circular Shafts in Torsion 10.2 Angle of Twist in the Elastic Range 10.3 Statically Indeterminate Shafts Review and Summary Review Problems 11 Pure Bending Introduction 11.1 Symmetric Members in Pure Bending 11.2 Stresses and Deformations in the Elastic Range 11.3 Members Made of Composite Materials 11.4 Eccentric Axial Loading in a Plane of Symmetry 11.5 Unsymmetric Bending Analysis 11.6 General Case of Eccentric Axial Loading Analysis Review and Summary Review Problems 12 Analysis and Design of Beams for Bending Introduction 12.1 Shear and Bending-Moment Diagrams 12.2 Relationships Between Load, Shear, and Bending Moment 12.3 Design of Prismatic Beams for Bending Review and Summary Review Problems 13 Shearing Stresses in Beams and Thin-Walled Members Introduction 13.1 Horizontal Shearing Stress in Beams 13.2 Longitudinal Shear on a Beam Element of Arbitrary Shape 13.3 Shearing Stresses in Thin-Walled Members Review and Summary Review Problems 14 Transformations of Stress Introduction 14.1 Transformation of Plane Stress 14.2 Mohr’s Circle for Plane Stress 14.3 Stresses in Thin-Walled Pressure Vessels Review and Summary Review Problems 15 Deflection of Beams Introduction 15.1 Deformation Under Transverse Loading 15.2 Statically Indeterminate Beams 15.3 Method of Superposition Review and Summary Review Problems 16 Columns Introduction 16.1 Stability of Structures 16.2 Centric Load Design Review and Summary Review Problems Appendices A Reactions at Supports and Connections B Centroids and Moments of Inertia of Common Geometric Shapes C Typical Properties of Selected Materials Used in Engineering D Properties of Rolled-Steel Shapes E Beam Deflections and Slopes Index Answers to Problems