Mechanics of Materials, 8th Edition

Description

Mechanics of Materials provides a precise presentation of subjects illustrated with numerous engineering examples that students both understand and relate to theory and application. The tried and true methodology for presenting material gives students the best opportunity to succeed in this course. From the detailed examples, to the homework problems, instructors and students can be confident the material is clearly explained and accurately represented. Cover Title Page Copyright Page About the Authors Contents Preface Guided Tour List of Symbols 1 Introduction—Concept of Stress 1.1 Review of The Methods of Statics 1.2 Stresses in the Members of a Structure 1.3 Stress on an Oblique Plane Under Axial Loading 1.4 Stress Under General Loading Conditions; Components of Stress 1.5 Design Considerations Review and Summary 2 Stress and Strain—Axial Loading 2.1 An Introduction to Stress and Strain 2.2 Statically Indeterminate Problems 2.3 Problems Involving Temperature Changes 2.4 Poisson’s Ratio 2.5 Multiaxial Loading: Generalized Hooke’s Law *2.6 Dilatation and Bulk Modulus 2.7 Shearing Strain 2.8 Deformations Under Axial Loading—Relation Between E, ν, and G *2.9 Stress-Strain Relationships for Fiber-Reinforced Composite Materials 2.10 Stress and Strain Distribution Under Axial Loading: Saint-Venant’s Principle 2.11 Stress Concentrations 2.12 Plastic Deformations *2.13 Residual Stresses Review and Summary 3 Torsion 3.1 Circular Shafts in Torsion 3.2 Angle of Twist in the Elastic Range 3.3 Statically Indeterminate Shafts 3.4 Design of Transmission Shafts 3.5 Stress Concentrations in Circular Shafts *3.6 Plastic Deformations in Circular Shafts *3.7 Circular Shafts Made of an Elastoplastic Material *3.8 Residual Stresses in Circular Shafts *3.9 Torsion of Noncircular Members *3.10 Thin-Walled Hollow Shafts Review and Summary 4 Pure Bending 4.1 Symmetric Members in Pure Bending 4.2 Stresses and Deformations in the Elastic Range 4.3 Deformations in a Transverse Cross Section 4.4 Members Made of Composite Materials 4.5 Stress Concentrations *4.6 Plastic Deformations 4.7 Eccentric Axial Loading in a Plane of Symmetry 4.8 Unsymmetric Bending Analysis 4.9 General Case of Eccentric Axial Loading Analysis *4.10 Curved Members Review and Summary 5 Analysis and Design of Beams for Bending 5.1 Shear and Bending-Moment Diagrams 5.2 Relationships Between Load, Shear, and Bending Moment 5.3 Design of Prismatic Beams for Bending *5.4 Singularity Functions Used to Determine Shear and Bending Moment *5.5 Nonprismatic Beams Review and Summary 6 Shearing Stresses in Beams and Thin-Walled Members 6.1 Horizontal Shearing Stress in Beams *6.2 Distribution of Stresses in a Narrow Rectangular Beam 6.3 Longitudinal Shear on a Beam Element of Arbitrary Shape 6.4 Shearing Stresses in Thin-Walled Members *6.5 Plastic Deformations *6.6 Unsymmetric Loading of Thin-Walled Members and Shear Center Review and Summary 7 Transformations of Stress and Strain 7.1 Transformation of Plane Stress 7.2 Mohr’s Circle for Plane Stress 7.3 General State of Stress 7.4 Three-Dimensional Analysis of Stress *7.5 Theories of Failure 7.6 Stresses in Thin-Walled Pressure Vessels *7.7 Transformation of Plane Strain *7.8 Three-Dimensional Analysis of Strain *7.9 Measurements of Strain; Strain Rosette Review and Summary 8 Principal Stresses Under a Given Loading 8.1 Principal Stresses in a Beam 8.2 Design of Transmission Shafts 8.3 Stresses Under Combined Loads Review and Summary 9 Deflection of Beams 9.1 Deformation Under Transverse Loading 9.2 Statically Indeterminate Beams *9.3 Singularity Functions to Determine Slope and Deflection 9.4 Method of Superposition *9.5 Moment-Area Theorems *9.6 Moment-Area Theorems Applied to Beams with Unsymmetric Loadings Review and Summary 10 Columns 10.1 Stability of Structures *10.2 Eccentric Loading and the Secant Formula 10.3 Centric Load Design 10.4 Eccentric Load Design Review and Summary 11 Energy Methods 11.1 Strain Energy 11.2 Elastic Strain Energy 11.3 Strain Energy for a General State of Stress 11.4 Impact Loads 11.5 Single Loads *11.6 Work and Energy Under Multiple Loads *11.7 Castigliano’s Theorem *11.8 Deflections by Castigliano’s Theorem *11.9 Statically Indeterminate Structures Review and Summary Appendices A Principal Units Used in Mechanics B Centroids and Moments of Areas C Centroids and Moments of Inertia of Common Geometric Shapes D Typical Properties of Selected Materials Used in Engineering E Properties of Rolled-Steel Shapes F Beam Deflections and Slopes G Fundamentals of Engineering Examination Answers to Problems Index