TMS 2023 152nd Annual Meeting & Exhibition Supplemental Proceedings

Description

This collection presents papers from the 152nd Annual Meeting & Exhibition of The Minerals, Metals & Materials Society. Contents Part I 2D Materials: Preparation, Properties, Modeling, and Applications 1 An Overview of Graphene-Based Nanomaterials in Electronic Skin Biosensing 2 Highly Exfoliated 2D Nanosheets of MnO₂ Assembled Alternatively with Carbon Layers for High Performance of Thick Electrode (at High Loading Mass) 3 Spectroscopic Studies on Sulfides and Selenides of Mo and W for Photoabsorbers 4 Super-Capacitor Based on Hybrid Architecture with 2D Materials 5 Utilizations of Graphene-Based Nanomaterials for the Detection and Treatment of Mycobacterium Tuberculosis Part II Accelerated Discovery and Insertion of Next Generation Structural Materials 6 Computational Design of an Ultra-Strong High-Entropy Alloy Part III Additive Manufacturing and Innovative Powder/Wire Processing of Multifunctional Materials 7 FeSiBCCr Amorphous Fine Powders with High Saturation Magnetization Based on Particle Size Classification and Its Magnetic Powder Cores with Low Core Loss 8 Study on the Optimization of Fe Content of FeSiBC Amorphous Powders Part IV Additive Manufacturing Fatigue and Fracture: Effects of Surface Roughness, Residual Stress, and Environment 9 High-Cycle Fatigue Property of Ferrite–Pearlite Steel for Engineering Machinery and Effects of Strengthening Mechanisms 10 On the Fatigue Performance of Additively Manufactured Metamaterials: A Combined Experimental and Simulation Study 11 Surface Roughness Measurements of Laser Deposited AlCoCrFeNiTi and AlCoCrFeNiCu High Entropy Alloys for Aerospace Applications Part V Additive Manufacturing of Metals: Applications of Solidification Fundamentals 12 Assessment of Phase Evolution in Titanium-Niobium-Based Alloys During Rapid Solidification 13 Challenges in Wire-Arc Additive Manufacturing of Fe-Based Shape Memory Alloy 14 Experimental Study on the Influence of Surface Curvature and Cladding Position on Geometric Accuracy for T15 Laser Cladding Layer 15 Impact of Laser Power and Scanning Velocity on Microstructure and Mechanical Properties of Inconel 738LC Alloys Fabricated by Laser Powder Bed Fusion 16 LPBF Fabrication of Thin Cross Sections: Challenges and Printability 17 Modification of H950 Condition for 17-4 PH Stainless Steel Processed by DED 18 Prediction of Solidification Cracking in Rene 80 Superalloy During the Directed Energy Deposition Process Part VI Additive Manufacturing: Length-Scale Phenomena in Mechanical Response 19 A Multiscale Study of the Interconnection Between Unit Cell Design, Processing Conditions, Microstructure, and Mechanical Properties of Additively Manufactured Titanium Metamaterials Part VII Additive Manufacturing: Materials Design and Alloy Development V—Design Fundamentals 20 Additive Manufacturing of Inconel 718 by Meltpool and Grain Boundary Engineering 21 Microstructure and Mechanical Properties of Arc-Melted NiSi11Cx Alloys Part VIII Advanced Biomaterials for Biomedical Implants 22 Application of Magnetic Iron Oxide Nanostructures in Drug Delivery: A Compact Review 23 Candida Albicans Biofilm Formation on an Additive-Manufactured Titanium Alloy 24 Characterization of Spicule Structure 25 Polymeric Biodegradable Biomaterials for Tissue Bioengineering and Bone Rejuvenation 26 The Effects of Thermal Treatment on the Properties and Performance of Hot Extruded Zn-Based Bioresorbable Alloy for Vascular Stenting Applications 27 ZnO-NPs-Coated Implants with Osteogenic Properties for Enhanced Osseointegration Part IX Advanced Characterization Techniques for Quantifying and Modeling Deformation 28 Characterization and Mechanical Testing of Ordinary Chondrites 29 Influence of Different Temperatures on Mechanical Properties of Flexible Screen Part X Advanced Functional and Structural Thin Films and Coatings and Honorary Palkowski Session 30 A Review of P(St-MMA-AA) Synthesis via Emulsion Polymerization, 3D P(St-MMA-AA) Photonic Crystal Fabrication, and Photonic Application 31 Effect of Drying on Textured Coat Synthesized from Waste Glass for Building Application 32 In-Situ Alloy Formation During Selective Laser Melting with CuSn10 and Aluminum Powders 33 Nanosized Cadmium Selenide Thin Coatings for Possible Utilization in Optoelectronics 34 Optical Properties of Crystalline Silicon in the Infrared 35 Prediction of Grain Size Evolution During Hot Rolling of HSLA Steels Considering Precipitation 36 Reduction of Friction and Adhesion in Copper and Brass Extrusion by Application of Boron Containing Surface Modifications 37 Thermal Fatigue of Spheroidal Graphite Cast Iron 38 Utilization of Plant Oil-Based Fatliquor in the Processing of Leather Part XI Advanced Joining Technologies for Automotive Lightweight Structures 39 Joint Strength Optimization of Single-Lap Al 5052-H36 Adhesively Bonded for Off-Road Vehicle Chassis Components 40 Recent Advances in the Transformative Non-fusion Weld-Brazing Process Used to Join Thin-Gauge Alloys Used in the Automotive Industry 41 Study on the Microstructure and Mechanical Properties of Aluminum Alloy 5754 to Advanced High Strength Steel by the Laser Welding-Brazing Technique Part XII Advanced Materials for Energy Conversion and Storage 2023 42 Aluminum-Anodes for Metal-Air-Batteries 43 Triple-Cation Perovskite Photoabsorbers and Solar Cells Part XIII Advances in Magnetic Materials 44 Incisive Review on Magnetic Iron Oxide Nanoparticles and Their Use in the Treatment of Bacterial Infections Part XIV Advances in Multi-principal Element Alloys II 45 Data-driven Search and Selection of Ti-containing Multi-principal Element Alloys for Aeroengine Parts Part XV Advances in Surface Engineering V 46 Effective Utilization of Metallurgical Characterization for Oxidation Resistance Coatings Part XVI Advances in Titanium Technology 47 Effect of the Vibratory Peening Parameters on Surface Properties of Ti-6Al-4 V 48 Investigation to Density and Metallurgical Characteristics of Selective Laser Melted Ti-5Al-5 V-5Mo-3Cr Versus Ti-6Al-4 V 49 Systematic Review of the Synthesis of Titanium Oxide Nanoparticles via Plant Mediation Green Approach Part XVII AI/Data Informatics: Computational Model Development, Validation, and Uncertainty Quantification 50 Data Assimilation for Microstructure Evolution in Kinetic Monte Carlo 51 Towards Machine Learning of Crystal Plasticity by Neural Networks Part XVIII Algorithm Development in Materials Science and Engineering 52 Differential Property Prediction: A Machine Learning Approach to Experimental Design in Advanced Manufacturing 53 Multi-faceted Uncertainty Quantification for Structure-Property Relationship with Crystal Plasticity Finite Element 54 Prediction of Cutting Surface Parameters in Punching Processes Aided by Machine Learning Part XIX Alloy Development for Energy Technologies: ICME Gap Analysis 55 Molecular Dynamics Study of Gradient Energy Coefficient and Grain-Boundary Migration in Aluminum Foam 56 Phase-Field Modeling of Aluminum Foam Based on Molecular Dynamics Simulations Part XX Alloys and Compounds for Thermoelectric and Solar Cell Applications XI 57 Stability Study of Cesium-Based Triple Cation Perovskite Solar Cells in Elevated Environmental Ambients Part XXI Biological Materials Science 58 A Concise Review of the Antibacterial Action of Gold Nanoparticles Against Various Bacteria 59 A Review of Nanovanadium Compounds for Cancer Cell Therapy 60 Biodegradation of Petroleum-Based Plastic Using Bacillus sp. 61 Comparative Characterization and Assay of Cow Horn Waste and Fish Feed as Biomaterials for Reinforcement in Aquaculture Feeds 62 Effect of Some Bio-Stimulants in the Degradation of Petroleum Hydrocarbons in Crude Oil Contaminated Soil Part XXII Composite Materials for Sustainable and Eco-Friendly Material Development and Application 63 Application Study of Fe-MOF Material for Fluoride Removal from Hydrometallurgy Waste Liquid 64 Detection and Mitigation of Radionuclides in the Environment: Toward a Clean Ecosystem 65 Effect of Waste Glass and Waste Tyre on the Workability and Strength of Concrete 66 Facile Ball-Milling Synthesis of Cellulosic Metal Oxide Composite for Removal of Tetracycline Antibiotic from Aqueous Solution 67 Fiber-Reinforced Polymeric Composites for Low-Carbon Construction Applications 68 Nanocomposite Materials for Accelerating Decarbonization 69 New Eco-Friendly Inorganic Polymeric Materials for the Passive Fire Protection of Structures 70 Optimization of Post-consumer Glass and Sawdust Reinforced Polyester Hybrid Composites by Mixture Design Analysis 71 Solvent-Free Ball-Milling Synthesis of BaO Modified Zeolite for Tetracycline Adsorption 72 Stain Resistant of Building Textured Coatings Developed from Recycled Glass 73 Study on the Removal of Cr(VI) Ions by Fe-MOF from Simulated Hydrometallurgy Wastewater 74 Weather Aged Fique Fabric Reinforced Epoxy Composite: Impact Property Analysis Part XXIII Computational Thermodynamics and Kinetics 75 Effect of Different Desulfurizers on Hot Metal Pretreatment 76 Modeling of Slag Modification on Inclusions in 54SiCr6 Spring Steel Part XXIV Deformation-Induced Microstructural Evolution During Solid Phase Processing: Experimental and Computational Studies 77 Analysis of Coarse Crystal Defect During Rolling of 3J1A Alloy Part XXV Electrical Steels 78 Constitutive Modelling of High-Temperature Flow Behavior of a Non-oriented Electrical Steel with 3.2 wt% Si 79 Effect of Melt Superheat on Microstructure and Texture of Non-oriented Electrical Steel Sheet Produced by the Ultra-Thin Strip Casting 80 Effect of Natural Deposited Films on Interfacial Heat Transfer During Sub-rapid Solidification of Non-oriented Electrical Steel 81 Effects of Normalization Process on Microstructure and Texture of Non-oriented Electrical Steel Produced by Ultra-Thin Strip Casting 82 The Role of Temper Rolling and Annealing on the Magnetic Property Improvement of a Low Si Non-oriented Electrical Steel Part XXVI Electronic Packaging and Interconnection 83 Dynamic Material Characterization Through In-Situ Electrical Resistivity Measurements of High Temperature Transient Liquid Phase Sinter Alloys 84 Effects of Diameter on Copper Pillar with Solder Cap Interconnections During Reflow Soldering Process 85 The Effect of Grain Boundary Type on Void Formation in a Through Silicon Via (TSV) Part XXVII Environmental Degradation of Multiple Principal Component Materials 86 High Temperature Oxidation of CoNiFeMnCr High Entropy Alloys Reinforced by MC-Carbides Part XXVIII Environmentally Assisted Cracking: Theory and Practice 87 Hydrogen Effects on Mechanical and Toughness Properties of Pipeline Steels 88 Improvement of Pitting Corrosion Resistance of 304 Stainless Steel with Lanthanum Addition 89 Influence of High-Temperature Tempering Treatment on Hydrogen Diffusion Behavior in X80 Pipeline Steel Containing Different Vanadium Contents 90 Liquid Metal Embrittlement Behavior of Dual-Phase Steels: The Influence of Microstructure and Strain Rate Part XXIX Fatigue in Materials: Fundamentals, Multiscale Characterizations, and Computational Modeling 91 Characterization of Low-Cycle Fatigue Deformation Behavior at RT/200 °C of FeMnAlC Lightweight Steel for Low-Pressure Turbine Blade 92 Experimental Study on the Influence of Surface Carbon Content on Crack Initiation for 20Cr2Ni4A Steel 93 Molecular Dynamics Simulations of the Thermal Evolution of Voids in Cu Bulk and Grain Boundaries Part XXX Frontiers in Solidification: An MPMD Symposium Honoring Jonathan A. Dantzig 94 Design and Technology Research of Copper Ingot Mold for Water-Cooled Mold 95 Design of Light Wind Turbine Parts by Simulation-Based Machine Learning 96 Rationalization of the Modelling of Stress and Strain Evolution in Powder Bed Fusion Additive Manufacturing—A Perspective from a Background in the Simulation of Casting Processes Part XXXI Functional Nanomaterials 2023 97 Semiconductor Nanomaterials and 3D Systems Part XXXII High Performance Steels 98 Effect of MgO, Ti₂O₃, and Al₂O₃ Inclusions on the Formation of Manganese-Depleted Zones Through First-Principles Calculation 99 Microstructure and Property Uniformity of 07MnNiMoDR Low Carbon Bainitic Steel Plate 100 Mechanical Properties and Microstructures Development of Quenching and Partitioning (Q&P) Steels During Galvannealing Process Part XXXIII High Temperature Creep Properties of Advanced Structural Materials 101 Creep Behavior at Elevated Temperatures of Several Polycrystalline Ni-based Superalloys Strengthened by MC-Carbides 102 Strengthening Against Creep at Elevated Temperature of HEA Alloys of the CoNiFeMnCr Type Using MC-Carbides Part XXXIV High Temperature Electrochemistry V 103 Chloro-Aluminate Species Distribution Correlation with Electrical Conductivity of 1-Ethyl-3-Methyl Imidazolium Chloride (EMIC)-Aluminum Chloride (AlCl₃) System Part XXXV Light Elements Technology 104 A New Method for Producing Hydrogen, Lithium Metal, and High-Purity Silicon from Spodumene Ore 105 Electrochemical Technology for Lithium-Isotopes Separation 106 High-Grade Li₂SO₄ from a Local Montebrasite Ore as Industrial Raw Material for Managing Bipolar Disorder 107 Process Simulation for Low Emission Hydrogen Production Using DWSIM 108 Recovery of Lithium from Waste LIBs Using Sulfuric Acid Roasting and Water Washing 110 Spark Plasma Sintered Boron Carbide Ceramic Armor 111 Spark Plasma Sintering and Characterization of B₄C-ZrB₂ Composites 112 Thoughts on the Role of Light Elements as Alternative Reductants in Major Ferroalloy Production 113 Utilizing of Tincal Ore Wastes in Ceramic Industry Part XXXVI Materials and Chemistry for Molten Salt Systems 114 Study of the Assimilation of Inclusions in Molten Mold Flux Under the Action of Low-Frequency Electromagnetic Fields 115 Thermodynamic Analysis of CoCrFeNi High-Entropy Alloys Prepared by Molten Salt Method Part XXXVII Mechanical Response of Materials Investigated Through Novel In-Situ Experiments and Modeling 116 Modeling of the Bending Behavior to Study Nested-Cylinder Structure in Spicules Part XXXVIII Nanostructured Materials in Extreme Environments 117 Study on Advanced Cementing Practices Using Inert Graphene Nanoplatelets and Hydraulic Fracturing Fluids for Wellbore Integrity and Sustainability Part XXXIX Natural Fibers and Its Composites: A Sustainable Solution 118 Corozo Palm Fibers: Mechanical Behavior and Potential Use for Composites 119 Feasibility Study of Incorporation of Dyeing Sludge in Red Ceramics 120 Influence of the Incorporation of Particulates from the Pineapple Crown on the Impact Strength of Epoxy Systems 121 Mitigation of Urban Noise Through the Implementation of Pumice with an Air Chamber on Building Facades 122 Natural Vegetable Fibers Used from Colombia and Their Use as Potential Reinforcement for Composite Materials Part XL Phase Stability in Extreme Environments 123 Heat Treatment Design of Inconel 740H Superalloy for Microstructure Stability and Creep Properties Enhancement Part XLI Phase Transformations and Microstructural Evolution 124 A Comprehensive Investigation on the Sintering Behavior of CaO–SiO₂–CaF₂–Al₂O₃ Slags System 125 Experimental Analysis of R-Phase NiTi Tube Actuators Using in Contact Conductive Heating Stage 126 Fracture Analysis for Intermediate Slabs of Wear-Resistant Steel Based on the Evolution of Surface Decarburization Behavior 127 The Formation and Stability of Nanosphere Composites 128 The Impact of Graphene Nanoplatelets (GNPs) on the Hydration Mechanism of Alite (C₃S) in Class-H Wellbore Cement with Focus on Microstructural Properties 129 Use of the Hollomon-Jaffe Tempering Parameter to Optimize the Microhardness in a Medium Carbon Low Alloy Cr–Mo Steel Part XLII Printed Electronics and Additive Manufacturing: Functional Materials, Processing Techniques, and Emerging Applications 130 Development of a Metamaterial Honeycomb Structure for Radar Absorbing Materials 131 Liquid Metal Inks for Printed Stretchable Electronics: Gallium Alloy Interactions with the Environment 132 Permanent Magnet Integrated Shock Absorber and Electric Generator Part XLIII Thermodynamics and Kinetics of Alloys 133 Thermodynamics and Kinetics of Reaction of Rare Earth (La, Ce, Y) with MgO Refractories Author Index Subject Index