TMS 2021 150th Annual Meeting & Exhibition Supplemental Proceedings

Description

This volume is a collection of papers from the TMS 2021 Virtual Annual Meeting & Exhibition. The contributions represent 40 symposia from the meeting. This volume andthe other 10 volumes published for the meeting—complemented by contributions to TMS archival journals—represent the available written record of the 86 symposia held at TMS2021 Virtual. Contents Part I 2D Materials—Preparation, Properties and Applications 1 Cesium Lead Bromides—Structural, Electronic and Optical Properties 2 Structure and Electrochemical Property of Coal-Based Activated Carbon Modified by Nitric Acid 3 Thermal Laser-Assisted Manufacturing of Two-Dimensional Atomic Layer Heterostructures Part II Additive Manufacturing: Beyond the Beam II 4 3D Printing Architecture 5 Effect of HS Binder on Reducing the Amount of Bentonite in Oxidized Pellets 6 Linear Friction Welding: A Solid-State Welding Process for the Manufacturing of Aerospace Titanium Parts Part III Additive Manufacturing Fatigue and Fracture V: Processing-Structure-Property Investigations and Application to Qualification 7 Defect-Based Fatigue Modeling for AlSi10Mg Produced by Laser Powder Bed Fusion Process 8 Effect of Laser Remelting on Microstructure, Residual Stress, and Mechanical Property of Selective Laser Melting-Processed Ti-6Al-4V Alloy 9 Notch Sensitivity of AlSi10Mg Aluminum Alloy Produced by Laser Powder Bed Fusion Process 10 Progressive Amplitude Fatigue Performance of Additively Manufactured Stainless Steel Superalloy Part IV Additive Manufacturing for Energy Applications III 11 Detection of Defects in Additively Manufactured Metals Using Thermal Tomography Part V Additive Manufacturing of Metals: Applications of Solidification Fundamentals 12 Influence of Pore Formation and Its Role on the Tensile Properties of 17-4 PH Stainless Steel Fabricated by Laser Powder Bed Fusion 13 Melt Pool Evolution in High-Power Selective Laser Melting of Nickel-Based Alloy 14 On Mesoscopic Surface Formation in Metal Laser Powder-Bed Fusion Process Part VI Additive Manufacturing: Solid-State Phase Transformations and Microstructural Evolution 15 Evolution of Microstructure and Dispersoids in Al-Mg 5xxx Alloys Under Wire + Arc Additive Manufacturing and Permanent Mold Casting 16 Main Microstructural Characteristics of Ti-6Al-4V Components Produced via Electron Beam Additive Manufacturing (EBAM) 17 Microstructural Characterization of Maraging 300 Steel Fabricated by Select Laser Melting 18 Tailoring Microstructure of Selective Laser Melted TiAl-Alloy with In-Situ Heat Treatment via Multiple Laser Exposure Part VII Advanced Characterization Techniques for Quantifying and Modeling Deformation 19 Analysis of Slip Transfer in Ti-5Al-2.5Sn (Wt%) at Two Temperatures in Comparison with Pure Aluminum Part VIII Advanced Functional and Structural Thin Films and Coatings 20 Atomic Layer Deposition and Atomic Layer Etching—An Overview of Selective Processes 21 Investigations on the Process Stability of Dry Deep Drawing with Volatile Lubricants Injected Through Laser-Drilled Microholes 22 Nanoengineered Coating; Lotus Effect, Morphology, Contact Angles and Wettability 23 Temperature Dependence of Energy Gap in Semiconductors—Influence on Solar Cell Performance Part IX Advanced High Strength Steels V 24 Correlation of Rolling Schedules, Mechanical Properties, and SCC Susceptibility of API X70 Steel Part X Advanced Magnetic Materials for Energy and Power Conversion Applications 25 Magnetic Augmented Rotation System (MARS)—An Update 26 Oxide Thin-Film Electronics for the Front-End Conditioning of Flexible Magnetic Field Sensors Part XI Advanced Materials for Energy Conversion and Storage VII 27 Aluminum-Ion Battery Made of AlCl₃-Trimethylamine Hydrochloride Ionic Liquid With Superior Performance 28 Investigation of Cost-Effective AlCl₃-Urea Ionic Liquid Analog for Al-Ion Batteries Part XII Advanced Real Time Imaging 29 In-Situ Quantitative Study of Heat Transfer Performance of Mold Flux by Using Double Hot Thermocouple Technology 30 Synchronized High-Speed Microscopy and Thermoanalytical Measurement for Sub-mm/sub-ms-scale Cathodic Behavior in Molten Salt Electrolysis 31 X-ray Radiography Study on Defect Analysis of Electron Beam Welded Plain C-Steel and Fe-7% Al Alloy Joints Part XIII Advances in Powder and Ceramic Materials Science 32 Biodegradability and Bioactivity of Porous Hydroxyapatite–Hardystonite–PCL for Using in Bone Tissue Engineering Application 33 Effect on Mechanical Properties of Porous Titanium by Adding Ferrovanadium Powder 34 Layered Ceramic Structures In₁+x(Ti₁/₂Zn₁/₂)₁-xO₃(ZnO)m (m = 2, 4 and 6; x = 0.5): Synthesis, Phase Stability and Dielectric Properties 35 Microwave Drying Behavior of Zinc Leaching Residue 36 Synthesis of Willemite Bio-Ceramic by Mechanochemical Procedure 37 Thermal Shock Resistance of Silica-Free Alumina–Spinel Castables 38 Thermodynamic Analysis of Fe-FeAl₂O₄ Composite Material Prepared by Molten Salt Deoxidation Part XIV Advances in Surface Engineering III 39 Evaluation of the Surface Integrity of Titanium Nitride Coating Deposited on the Ni–Ti Substrate Through the Near-Dry Electrical Discharge Surface Coating Process Part XV Advances in Titanium Technology 40 Investigation to Hole Surface Microstructure Evolution in Drilling of Aerospace Alloys: Ti-5553 Part XVI AI/Data Informatics: Applications and Uncertainty Quantification at Atomistics and Mesoscales 41 Solving Stochastic Inverse Problems for Structure-Property Linkages Using Data-Consistent Inversion Part XVII AI/Data Informatics: Design of Structural Materials 42 Incorporating Historical Data and Past Analyses for Improved Tensile Property Prediction of 9% Cr Steel 43 Prediction of the Mechanical Properties of Aluminum Alloy Using Bayesian Learning for Neural Networks 44 Solving Inverse Problems for Process-Structure Linkages Using Asynchronous Parallel Bayesian Optimization Part XVIII Algorithm Development in Materials Science and Engineering 45 2D Microstructure Reconstruction for SEM via Non-local Patch-Based Image Inpainting 46 Dislocation Dipole Study on Material Hardening/Softening 47 Model and Improved Dynamic Programming Algorithm for Optimization of Unplanned Slab Allocation in the Steel Plant Part XIX Alloys and Compounds for Thermoelectric and Solar Cell Applications IX 48 Order Parameter from the Seebeck Coefficient in Thermoelectric Kesterite Cu₂ZnSnS₄ Part XX Biological Materials Science 49 Effect of Cobalt Metal on the Microstructure of Titanium Foam Part XXI Characterization of Nuclear Materials and Fuels with Advanced X-ray and Neutron Techniques 50 Non-destructive Correlative 3D Characterization of Nuclear Graphite: From the Micro-scale to the Nano-scale Part XXII Computational Techniques for Multi-scale Modeling in Advanced Manufacturing 51 A Parametric Study of Grain Size and Its Volume Fraction Effect on Heterogeneous Materials Mechanical Properties 52 Computational Multi-scale Modeling of Segregation and Microstructure Evolution During the Solidification of A356 Ingots Processed via a 2-Zone Induction Melting Furnace 53 Effect of Nozzle Injection Mode on Initial Transfer Behavior of Round Bloom 54 Study on the In-mold Flow Behavior Driven by a Subsurface Electromagnetic Stirring for IF Steel Slab Casting Part XXIII Corrosion in Heavy Liquid Metals for Energy Systems 55 Corrosion Investigations of Materials in Antimony–Tin and Antimony–Bismuth Alloys for Liquid Metal Batteries 56 Engineering Model of the Kinetics of the Steel Oxide Layer in a Flow of a Heavy Liquid Metal Coolant Under Various Oxygen Conditions 57 Exposure Tests of Different Materials in Liquid Lead for LFRs: Effect of the Dissolved Oxygen on Corrosion 58 Fundamental Interactions of Steels and Nickel‐based Alloys with Lead‐based Liquid Alloys or Liquid Tin 59 Numerical and Analytical Research of the Formation and Accumulation of Deposits on the Circuit with HLM Coolant Within the Consistent Model for Physical and Chemical Processes Part XXIV Deformation Induced Microstructural Modification 60 Analysis of Al 6061 and Mild Steel Joints from Rotary Friction Welding 61 Investigation of Mechanical Properties and Microstructural Valuation Under Different Heat Treatment Parameters of AA6060 Alloy Used in Crash Boxes Part XXV Electronic Packaging and Interconnections 2021 62 On Interface Formation in Zr-Based BMG/6061 Al Interconnects Joined by µFSSW 63 Reliability Evaluation of Ag Sinter-Joining Die Attach Under a Harsh Thermal Cycling Test Part XXVI Environmentally Assisted Cracking: Theory and Practice 64 A Multiphysics Model of Synergistic Environmental Exposure-Assisted Damage of Composite Using Homogenization-Based Degradation Variables 65 Assessing the Susceptibility of Existing Pipelines to Hydrogen Embrittlement 66 Combined Ab Initio and Experimental Study of Hydrogen Sorption in Dual-Phase Steels 67 Stress Corrosion Cracking of TRIP Fe₃₉Mn₂₀Co₂₀Cr₁₅Si₅Al₁ (at.%) High Entropy Alloy Part XXVII Fatigue in Materials: Fundamentals, Multiscale Characterizations and Computational Modeling 68 Microstructure and Fatigue Damage Evolution in Additive-Manufactured Metals Using Enhanced Measurement Techniques and Modeling Approaches Part XXVIII Frontiers in Solidification Science VIII 69 Research on Solidification and Heat Transfer Characteristics of Molten Converter Slag in Air Quenching Granulation Process Part XXIX Functional Nanomaterials: Functional Low-Dimensional Materials (0D, 1D, 2D) Driving Innovations in Electronics, Energy, Sensors, and Environmental Engineering and Science 2021 70 Silicon Carbide Biotechnology: Carbon-Based Neural Interfaces Part XXX Heterostructured and Gradient Materials (HGM IV): Tailoring Heterogeneity for Superior Properties 71 Gradients, Singularities and Interatomic Potentials Part XXXI High Temperature Electrochemistry IV 72 Investigation on Preparation of Fe–Al Alloys by Direct Reduction of Fe₂O₃–Al₂O₃ Powder in CaCl₂–NaCl Molten Salt System 73 Liquid Bipolar Electrode for Extraction of Aluminium and PGM Concentrate from Spent Catalysts Part XXXII Materials for High Temperature Applications: Next Generation Superalloys and Beyond 74 Open Die Forging Simulation of Superalloy NIMONIC 115 Using DEFORM 3D Software Part XXXIII Mechanical Behavior of Nuclear Reactor Components 75 In-situ Scanning Electron Microscopic Observation of Creep and Creep-Fatigue of Alloy 709 76 Simulation of Intergranular Void Growth Under the Combined Effects of Surface Diffusion, Grain Boundary Diffusion, and Bulk Creep Part XXXIV Mechanical Response of Materials Investigated Through Novel In-Situ Experiments and Modeling 77 In Situ Characterization of the Damage Initiation and Evolution in Sustainable Cellulose-Based Cottonid 78 Non-destructive Inspection of Contaminated Epoxy Plates Using Propagating Acoustic Waves 79 Application of High-Throughput Experimental Techniques in Metal Materials Research 80 Dilatometric Analysis of Tempering Kinetics in a Cr–Mo–V Medium-Carbon Steel 81 Thermal and Mechanical Characterization of Non-isothermal Tempering of an Experimental Medium-Carbon Steel Part XXXVI Phonons, Electrons and Dislons: Exploring the Relationships Between Plastic Deformation and Heat 82 Unified Analysis of Temperature Fields Arising from Large Strain Deformation and Friction in Manufacturing Processes Part XXXVII Powder Materials for Energy Applications 83 Thermodynamic Behavior Analysis of Fe-FeAl₂O₄ Cermet Prepared by Zinc Kiln Slag 84 Tunable Morphology Synthesis of Lithium Iron Phosphate as Cathode Materials for Lithium-Ion Batteries Part XXXVIII Recent Advances in Functional Materials and 2D/3D Processing for Sensors, Energy Storage, and Electronic Applications 85 3D Printed Passive Sensors—An Overview 86 Modeling of Rheological Properties of Metal Nanoparticle Conductive Inks for Printed Electronics 87 Performance of Chromium Doped Zinc Selenide Nanocrystals: Morphological and Fluorescence Characteristics Part XXXIX Recycling and Sustainability for Emerging Technologies and Strategic Materials 88 Characterisation and Techno-Economics of a Process to Recover Value from E-waste Materials 89 Computational Modeling of Current Density Distribution and Secondary Resistances for Aluminum Electrorefining in Ionic Liquids 90 Conductivity of AlCl₃-BMIC Ionic Liquid Mixtures Containing TiCl₄ at Different Temperatures and Molar Ratios 91 Determination of Physico-Chemical and Hardness Properties of Mullite Rich Tailings from Density Separated Copper Smelter Dust for Ceramic Application 92 Electrochemical Separation of Aluminum from Mixed Scrap Using Ionic Liquids 93 Iron Recovery from Nickel Slag by Aluminum Dross: A Static Model from Industrial Practice View 94 Resource Recovery of Cerium from Spent Catalytic Converter Using Aqueous Metallurgy 95 Transient Vortex Flow Characteristics in Three-Strand Bloom Tundish at the End of Casting Part XL Thermal Property Characterization, Modeling, and Theory in Extreme Environments 96 Energy Balance Investigation of Close-Coupled Optimized-Pressure Gas Atomization Pour-Tube Design Geometry to Prevent Melt Freeze-Off Author Index Subject Index