NFPA 2001 : standard on clean agent fire extinguishing systems 2018

Description

Important Notices and Disclaimers Additional Notices and Disclaimers Chapter 1 Administration 1.1 Scope. 1.2 Purpose. 1.3 Units. 1.4 General Information. 1.5 Safety. 1.6 Environmental Factors. 1.7 Retrofitability. 1.8 Compatibility with Other Agents. Chapter 2 Referenced Publications 2.1 General. 2.2 NFPA Publications. 2.3 Other Publications. 2.4 References for Extracts in Mandatory Sections. Chapter 3 Definitions 3.1 General. 3.2 NFPA Official Definitions. 3.3 General Definitions. Chapter 4 Components 4.1 Agent Supply. 4.2 Distribution. 4.3 Detection, Actuation, Alarm, and Control Systems. Chapter 5 System Design 5.1 Specifications, Plans, and Approvals. 5.2 System Flow Calculations. 5.3 Enclosure. 5.4 Design Concentration Requirements. 5.5 Total Flooding Quantity. 5.6 Duration of Protection. 5.7 Distribution System. 5.8 Nozzle Choice and Location. Chapter 6 Local Application Systems 6.1 Description. 6.2 Hazard Specifications. 6.3 Clean Agent Requirements. 6.4 Nozzles. 6.5 Location and Number of Nozzles. 6.6 Operation. Chapter 7 Approval of Installations 7.1 Safety. 7.2 General. 7.3 Acceptance Test Report. 7.4 Review of Mechanical Components. 7.5 Review of Enclosure Integrity. 7.6 Review of Electrical Components. 7.7 Functional Testing. 7.8 Owner’s Documentation. 7.9 Training. Chapter 8 Inspection, Servicing, Testing, Maintenance, and Training 8.1 General. 8.2 Monthly Inspection. 8.3 Semiannual Service and Inspection. 8.4 Annual Inspection and Service. 8.5 Maintenance. 8.6 Container Test. 8.7 Hose Test. 8.8 Training. Chapter 9 Marine Systems 9.1 General. 9.2 Use and Limitations. 9.3 Hazards to Personnel. 9.4 Agent Supply. 9.5 Detection, Actuation, and Control Systems. 9.6 Additional Requirements for Systems Protecting Class B Hazards Greater Than 6000 ft3 (170 m3) with Stored Cylinders Within the Protected Space. 9.7 Enclosure. 9.8 Design Concentration Requirements. 9.9 Distribution System. 9.10 Nozzle Choice and Location. 9.11 Inspection and Tests. 9.12 Approval of Installations. 9.13 Periodic Puff Testing. 9.14 Compliance. Annex A Explanatory Material Annex B Cup Burner Method for Determining the Minimum Concentration of Gaseous Agent for Flame Extinguishment Annex C Enclosure Integrity Procedure Annex D Enclosure Evaluation Annex E Informational References