Advanced Manufacturing and Materials Science

Description

This book presents selected papers from the international conference on advanced manufacturing and materials sciences (ICAMMS 2018). The papers reflet recent advances in manufacturing sector focusing on process optimization and give emphasis to testing and evaluation of new materials with potential use in industrial applications. Front Matter ....Pages i-ix Effect of Magnetic Field to Reduce Emissions and Improve Combustion Performance in a Spark-Ignition Engine (Vishnu Sankar, Sanath M. Chandran, Tharun Tomy, Unni Raj, Vivek Samson, K. Ramachandran)....Pages 1-10 Experimental Investigation on Reverse Engineering Techniques Employing Response Surface Methodology for Freeform Surfaces (G. Sreeram Reddy, V. V. Satyanarayana, Manzoor Hussain, J. Jagadesh Kumar)....Pages 11-20 Effect of Process Parameters and Cryotreated Post Tempered Electrodes on the Radial Overcut of AISI 304 During EDM: A Comparative Study (Munmun Bhaumik, Kalipada Maity)....Pages 21-28 Shrinkage Porosity Reduction in Aluminium Alloy A356 Using Simulation Tool with Assisted Rapid Prototyping Casting (Suresh Laxman Chittewar, Rajesh M. Metkar, Santosh Tanaji Ghutukade)....Pages 29-38 Finite Element Analysis of Rail Vehicle Suspension Spring for Its Fatigue Life Improvement (M. A. Kumbhalkar, D. V. Bhope, A. V. Vanalkar)....Pages 39-53 Analysis of Optimized Roller Burnishing Parameters Using ANSYS (Priyanka S. Yadav, Dayanand A. Ghatge)....Pages 55-61 Resistance Spot Welding of Cold Rolled Mild Steel with Filler Metal (Sushil T. Ambadkar, Deepak V. Bhope)....Pages 63-73 Study on Squeeze Casting of Aluminum Matrix Composites—A Review (L. Natrayan, M. Senthil Kumar)....Pages 75-83 Development and Investigation of Microstructure and Mechanical Properties of Cast and Hot Forged AL2014-TIB2 In Situ Composite by Stir Casting (M. Senthil Kumar, R. D. Hemanth, B. Ashok Kumar, M. Venkateswarlu, P. Kuppan)....Pages 85-91 Mechanical Characterization and Comparative Evaluation of the Different Combination of Natural and Glass Fiber Reinforced Hybrid Epoxy Composites (C. M. Meenakshi, A. Krishnamoorthy)....Pages 93-101 Use of Polylactic Acid (PLA) Material for Asymmetric Spur Gear Manufactured by 3-D Printing (Laxman B. Abhang, Akshay Govardhan Dekhane)....Pages 103-113 Tribological Study of AA2024-B4C Composites Using ANOVA (Bhargavi Rebba, N. Ramanaiah, S. Rajesh)....Pages 115-127 A Review on Effects of Various Parameters in Modulated Tool Path (MTP) Machining (P L. Jayananthan, B. Aravind Kumar)....Pages 129-137 Machining of Difficult to Cut Materials by Electrochemical Discharge Machining (ECDM) Process: A State of Art Approach (Manpreet Singh, Sarbjit Singh)....Pages 139-149 Development of Super Hydrophobic Surfaces for Oil Spill Separation (Alex K. Babu, Alwinson Kuriakose Geevarghese, Althaf Easa, Anthea Judette Maxi Fernandez, Rakesh Reghunath, Soney C. George et al.)....Pages 151-162 FEA Study of the Multiple Structural Orientations on Selective Laser Melted Cobalt Chrome Open-Porous Scaffolds (Aby K. Abraham, V. G. Sridhar)....Pages 163-170 Effect of Silicon Carbide as Filler Reinforcement on the Mechanical Properties of Glass Fiber Epoxy Composites (Antara Bhattacharjee, S. Sujaykhosh, B. K. Nanda)....Pages 171-176 Optimization of Weld Bead Geometry of C263 Nimonic Alloy Electron Beam Weld Joints (Shaik Rifshu Hussain, K. P. V. Krishna Varma, Sriniwash Anand, C. Lavanya)....Pages 177-190 Development of a System for Simultaneous Rotation of Multiple Stacks of Uranium Dioxide Pellets (M. Sriniwash Anand, Meesala Shivasai, G. Sai Sasank, Gorkala Madhu, Shaik Rifshu Hussain)....Pages 191-202 Investigation on the Influence of Nano Structured Zirconia Coating on the Corrosion Inhibition of SS 304 Stainless Steel (A. V. Ajay, Sivakumar S. Nair, Sreejith Mohan, Y. Vaisakh)....Pages 203-212 Size Effect in Mechanical Behavior of Nb Microwires (K. S. Athira, Atul H. Chokshi)....Pages 213-220 Modeling and Predicting the Mechanical Properties of Nano Clay Dispersed Natural Fiber Hybrid Intra-ply Woven Fabric Composite by Using Response Surface Methodology (K. Jayakrishna, M. Rajesh, A. Soundhar, K. Surendhar, M. T. H. Sultan)....Pages 221-233 Design and Evaluation of Al Hybrid Composite for Connecting Rod (M. S. Kiran Sankar, S. Akhil, O. Harikrishnan)....Pages 235-243 Literature Review of Hard Turning and It’s Thermal Aspects (Shahu Patil, Priya Jadhav, Satish Kumar)....Pages 245-254 Photocatalytic Degradation of Rhodamine-B by Advance Oxidative Process Using Electrochemically Synthesized ZnO–V2O5 Nanostructures (Jenice Jean Goveas, Naveen Praveen Mascarenhas, Richard Adolf Gonsalves)....Pages 255-263 Facile Synthesis and Characterisation of Nanocomposite Doped Chitosan—Polystyrene Polymer Blends (Naveen Praveen Mascarenhas, Jenice Jean Goveas, Richard Adolf Gonsalves, T. Chandra Shekara Shetty, Vincent Crasta)....Pages 265-273 Influence of EDM Control Factors for Aluminium Hybrid Composites (Kamalkishor Ghisulal Maniyar, Dilip Sahebrao Ingole)....Pages 275-284 Thermal Conductivity of Silicon Nitride Reinforced Al6061 Based Composites (R. Keshavamurthy, N. P. Muthuraju, H. Govindaraju)....Pages 285-291 Grinding of Inconel 718 Using Soap Water Jet and Liquid Carbon Dioxide (Arnab Kundu, Sirsendu Mahata, Manish Mukhopadhyay, Ayan Banerjee, Bijoy Mandal, Santanu Das)....Pages 293-300 Mechanical Properties of Al7075-SiC-TiO2 Hybrid Metal Matrix Composite (G. S. Pradeep Kumar, R. Keshavamurthy, Vijay Tambrallimath, Riya Biswas, Yogesh Sahebrao Andhale)....Pages 301-307 Study on Machinability of Aluminum Alumina Metal Matrix Composites (M. Sucharitha, B. Ravi Sankar)....Pages 309-315 Performance Evaluation of Cutting Parameters for Surface Roughness & Power Consumption in Turning of 904L Stainless Steel Using Vegetable Oil Based Cutting Fluids (Rushikesh P. Waydande, Dayanand A. Ghatge)....Pages 317-325 Experimental Study on the Effects of Bio Ethanol Petrol Blends in a Spark Ignition Engine: Performance Analysis (P. Anu Nair, S. Sarath, Agresh S. Kumar, Akshay Jegy George, Anoop G. Das)....Pages 327-336 An Experimental and Theoretical Study on the Effect of Microstructure on the Tensile Behavior of Polylactide Nano Composites (Anupam Glorious Lobo, B. K. Sarojini, Sabu Thomas, Adeeb Aman, Mahammad Nawaz, Abdul Mujeeb)....Pages 337-348 Oxidation and Hot Corrosion Performance of Al2O3-40%TiO2 Coating on Nickel Based Superalloys at 800 °C (Naveen Kumar, Vivek Kumar, S. B. Mishra)....Pages 349-358 Numerical Simulation of Crack Propagation in Double Torsion Test (Karuppasamy Pandian Marimuthu, Kwangmin Lee, Hyungyil Lee)....Pages 359-367 Structural and Dielectric Properties of Polycrystalline Calcium Copper Titanate (CCTO) (J. Mohammed, Isah I. Garba, K. U. Yerima, A. Muhammad, U. F. Zulfatu, Mubarak S. Abubakar et al.)....Pages 369-378 Investigation on Mechanical and Wear Properties of Aluminium Based Metal Matrix Composite Reinforced with B4C, Gr and Fly Ash (M. H. Faisal, S. Prabagaran)....Pages 379-385 Aluminium Carbon Nanotube Composites—A Review on Latest Approaches (A. H. Sajeeb Rahiman, D. S. Robinson Smart)....Pages 387-393 Effect of Mechanical and Metallurgical Analysis of Magnesium and Aluminium Alloys Using Diffusion Bonding (R. J. Golden Renjith Nimal, M. Sivakumar, S. Arungalai Vendan, G. Esakkimuthu)....Pages 395-401 Operation Sequence Dependent Part Family Formation for Reconfigurable Manufacturing System (RMS) (Rutuja Krishnat Shivads, Martand Tamanacharya Telsang)....Pages 403-410 Modeling and Analysis of Tool Wear Based on Cutting Force and Chip-Tool Interface Temperatures in Turning (L. B. Abhang, M. Hameedullah)....Pages 411-420 On the Mechanical and Microstructural Properties of Novel A356/Kevlar Surface Composite Fabricated via Friction Stir Processing (S. Pradeep Devaneyan, D. Peter Pushpanathan, Adhesh Parambath)....Pages 421-429 Production of Biodiesel from High FFA Non-edible Nahar Oil and Optimization of Yield (Santosh Kumar Dash, Pradip Lingfa)....Pages 431-439 Microstructural Evaluation, Tribological Behavior and Mechanical Properties of Cu–Ni Alloy After Addition of Chromium Under Spinodal Conditions (Sagar C. Jirapure, Atul B. Borade)....Pages 441-447 Development of Fire Resistant Polymeric Nano Composites Using Plasma Modified Calcium Silicate (G. Ajeesh, P. Sanjana, M. Raji Sivani, S. Govardhan, A. Sudhin, Philip Goerge)....Pages 449-456 Welding Metallurgy of Corrosion Resistant 21st Century Ni-Based Superalloy 686 (B. Arulmurugan, M. Sathishkumar, K. Gokulkumar, K. Mageshkumar, P. Subramani, M. Venkateshkannan et al.)....Pages 457-463