Proceedings of the 41st International Conference on Advanced Ceramics and Composites

Description

This proceedings contains a collection of 24 papers from The American Ceramic Society’s 41st  International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 22-27, 2017. This issue includes papers presented in the following symposia: •             Symposium 3     14th International Symposium on Solid Oxide Fuel Cells (SOFC) •             Symposium 8     11th International Symposium on Advanced Processing & Manufacturing Technologies for Structural & Multifunctional Materials and Systems •             Symposium 11   Advanced Materials and Innovative Processing ideas for the Production Root Technology •             Symposium 12   Materials for Extreme Environments: Ultrahigh Temperature Ceramics (UHTCs) and Nano-laminated Ternary Carbides and Nitrides (MAX Phases) •             Symposium 13   Advanced Materials for Sustainable Nuclear Fission and Fusion Energy •             Symposium 14   Crystalline Materials for Electrical, Optical and Medical Applications •             Symposium 15   Additive Manufacturing and 3D Printing Technologies •             Focused Session 1  Geopolymers, Chemically Bonded Ceramics, Eco-friendly and Sustainable Materials Content: Intro Proceedings of the 41st International Conference on Advanced Ceramics and Composites Contents Introduction Solid Oxide Fuel Cells MITIGATION OF COMPRESSOR STALL/SURGE IN A HYBRID SOLID OXIDE FUEL CELL-GAS TURBINE SYSTEM INTRODUCTION TURBOMACHINERY MODELING RESULTS AND DISCUSSION CONCLUSION ACKNOWLEDGEMENTS REFERENCES CHARACTERISTICS OF PROTECTIVE SPINEL MANGANESE COBALTITE COATINGS PRODUCED BY APS FOR Cr-CONTAINED SOFC INTERCONNECTS INTRODUCTION EXPERIMENTAL RESULTS AND DISCUSSION CONCLUSION REFERENCES INFLUENCE OF TEMPERATURE AND STEAM CONTENT ON DEGRADATION OF METALLIC INTERCONNECTS IN REDUCING ATMOSPHERE1. INTRODUCTION 2. METHODS & EXPERIMENTALS 3. RESULTS & DISCUSSION 3.1 Characterization of the oxide growth of the outer oxidation zone 3.2 Characterization of the oxide growth of the inner oxidation zone 3.3 Investigation of the oxide growth at different water content in fuel gas 3.4 Resistivity measurements in dual gas atmosphere 3.5 Comparison of the outer oxidation zone with data from SOFC stacks 4. CONCLUSIONS 5. ACKNOWLEDGEMENTS 6. REFERENCES FABRICATION OF THE ANODE-SUPPORTED SOLID OXIDE FUEL CELL WITH DIRECT PORE CHANNEL IN THE CERMET STRUCTURE TO IMPROVE THE ELECTROCHEMICAL PERFORMANCEINTRODUCTION EXPERIMENTAL DETAILS RESULTS AND DISCUSSION CONCLUSIONS REFERENCES CRITICAL EVALUATION OF DYNAMIC REVERSIBLE CHEMICAL ENERGY STORAGE WITH HIGH TEMPERATURE ELECTROLYSIS BACKGROUND EXPERIMENTAL MODEL CONCLUSIONS REFERENCES ESTIMATION OF POLARIZATION LOSS DUE TO CHROMIUM POISONING OF LSM-BASED CATHODES IN SOLID OXIDE FUEL CELLS INTRODUCTION EXPERIMENTAL RESULTS AND DISCUSSION Polarization Modeling Cell Performance AnalysisEvaluation of Cr-Poisoning Effect Microstructures CONCLUSIONS ACKNOWLEDGMENTS REFERENCES Advanced Processing and Manufacturing Technologies SYNTHESIS AND TRIBOLOGICAL BEHAVIOR OF Bi-Cr2AlC COMPOSITES INTRODUCTION EXPERIMENTAL RESULTS AND DISCUSSION CONCLUSIONS ACKNOWLEDGEMENTS REFERENCES FINITE ELEMENT ANALYSIS OF SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS (SHS) OF SILICON NITRIDE INTRODUCTION EXPERIMENTAL ADIABATIC TEMPERATURE CALCULATIONS FINITE ELEMENT ANALYSIS MATHEMATICAL MODEL Model Description RESULTS AND DISCUSSION CONCLUSIONS ACKNOWLEDGMENTNOMENCLATURE REFERENCES TEM ANALYSIS OF DIFFUSION-BONDED SILICON CARBIDE CERAMICS JOINED USING METALLIC INTERLAYERS INTRODUCTION EXPERIMENTAL RESULTS AND DISCUSSION Preparation of Thin Samples from Diffusion Bonding STEM Imaging STEM-EDS Mapping TEM Imaging and SAD analysis Formation of the Joint Microstructure CONCLUSIONS ACKNOWLEDGEMENTS REFERENCES NUMERICAL ANALYSIS OF INHOMOGENEOUS BEHAVIOR IN FRICTION STIR PROCESSING BY USING A NEW COUPLED METHOD OF MPS AND FEM INTRODUCTION METHOD FOR ANALYSIS Modeling for Analysis MPS Method Modeling for MPS Method