Applications of Computation in Mechanical Engineering: Select Proceedings of 3rd International Conference on Computing in Mechanical Engineering (ICCME 2021)

Description

This volume includes select peer reviewed proceedings from the 3rd International Conference on Computing in Mechanical Engineering (ICCME 2021) discussing the application of computer based simulations in mechanical and allied engineering disciplines. The book shows advanced applications of numerical techniques in different areas of mechanical engineering. The topics covered include numerical modelling, simulations and optimization best practices in various challenging domains like fluid dynamics, combustion in IC engines, heat transfer analysis, vibration damping and control, chemical and process engineering, mechanics of machining, nano fluidics and material science. This book will be a useful resource to students, researchers and engineers working on multidisciplinary engineering problems, specially focusing on mechanical engineering and applied mathematics issues, with hope that it will impact future developments in engineering disciplines and motivate advancements and innovations in technical sciences. Preface I Preface II Acknowledgments About the Conference Conference Organizers Contents About the Editors Conceptual Design of Zero-Emission Sailing Ship Renewable Energy Challenges 1 Introduction 1.1 On-Board Energy Storage (for ‘no Wind’ Periods) 2 Zero-Emission Passenger Sailing Ship Project 2.1 Design Challenges 2.2 Energy Storage (Batteries) 3 Conclusions 3.1 Industry-Wide Cooperation 3.2 Backed by Academia 3.3 Establishment of the Digital Twin to Reach LeDA 3.4 Life Cycle Approach Starts at Conceptual Design 3.5 On Sails Design 3.6 On Electricity Storage and Management 3.7 On Solar 3.8 Teamwork Towards Excellence References Modeling and Simulation in Materials and Manufacturing Simulation Analysis of Composite Materials for Divergence Elimination 1 Introduction 2 Methodology 3 Computation of Buckling Factor and Displacement 4 Stiffness Matrix 4.1 Transformation Matrix 4.2 Transformed Stiffness Matrix 4.3 ABD Matrix Formula 4.4 Buckling Factor 4.5 Displacement 5 Results and Discussions 6 Conclusion References Effect of Fiber Drawing on Tensile Strength of UHMWPE Single Fibers: Simulation via Von Mises Stress Criterion 1 Introduction 2 Experimental Details 2.1 Materials 2.2 UHMWPE Fiber Spinning Through the Gel-Spinning Process 2.3 Measurement of UHMWPE Fiber Diameter 2.4 Tensile Test of Single UHMWPE Fibers 2.5 Finite Element Modeling 2.6 X-Ray Diffraction (XRD) Studies of UHMWPE Single Fibers 3 Results and Discussion 4 Conclusions References Prediction of In-Process Forces and Tool Durability in Stationary Shoulder Friction Stir Welding: A Process Modeling Approach 1 Introduction 2 Numerical Modeling 3 Materials and Methods 4 Results and Discussion 5 Conclusion References Wire Arc Additive Manufacturing of ATI 718PLUS®: A Process Modeling Approach 1 Introduction 2 Modeling of WAAM Process 2.1 Heat Source Model 2.2 Thermal Modelling 3 Results and Discussions 4 Conclusion References A Review on Computational Techniques for Nanostructured Polymer Composite Materials 1 Introduction 2 Computational Analysis of Polymer Matrix Composites 2.1 Types of Particle-Based Simulation Methods 3 Conclusion References Design and Computational Analysis of DeusCell—A Piston Actuated Modular Reconfigurable Robot 1 Introduction 2 Methodology 3 Design 3.1 Inner Components 3.2 Shell 4 Working 5 Analysis 6 Results 6.1 Factor of Safety 6.2 Stress Analysis 6.3 Strain Analysis 6.4 Total Displacement 6.5 Contact Pressure 7 Conclusion References Structural Design of Ultimate Terrain Electric Vehicle Suspension System 1 Introduction 2 Methodology 3 Results and Discussion 4 Conclusion References Modal Analysis of Motorcycle Handlebar 1 Introduction 2 Method 2.1 Impact Hammer Test 2.2 Reverse Engineering of Handlebar 2.3 Modal Analysis 2.4 Modification of Handlebar 3 Results 4 Conclusion References Computing in Medicine and Biology CFD Analysis to Minimize the Spread of COVID-19 Virus in Air-Conditioned Classroom 1 Introduction 2 Computational Methodology 2.1 Specification of CAD Model and Numerical Model 2.2 Validation of Numerical Model with Literature 3 Results and Discussion 3.1 Investigation of a Classroom with a Central Air Conditioning System and Aerosol-Based Disinfectant Machine 3.2 Investigation of the Classroom with Split Air Conditioning System and Parallel Flow Aerosol-Based Disinfectant Machine 3.3 Investigation of a Classroom with a Split Air Conditioning System and Counterflow Aerosol-Based Disinfectant Machine 4 Conclusion References A Viable Approach to Medical Image Processing for CFD Simulations of the Upper Respiratory Tract 1 Introduction 2 Methodology 2.1 Upper Airway Segmentation 2.2 CFD Analysis 3 Results 3.1 Segmented Geometry 3.2 Meshing 3.3 Flow Pattern 4 Conclusion References Evaluation of Hemodynamics Parameters in Carotid Bifurcation System using Numerical Simulation 1 Introduction 2 Methods 2.1 Acquisition of Images and Reconstruction 2.2 Computational Setup and Flow Modelling 3 Results and Discussion 3.1 Velocity 3.2 Pressure 3.3 Vorticity 3.4 Wall Shear Stress 4 Conclusion References Comparison of Newtonian and Non-Newtonian Flow in Abdominal Aorta and Renal Artery Using Numerical Simulation 1 Introduction 2 Methodology 2.1 Governing Equation of Fluid Flow 2.2 Geometric Model 2.3 Meshing 2.4 Boundary Conditions and Solver Settings 3 Result and Discussion 3.1 Velocity Distribution 3.2 Pressure Distribution 3.3 Wall Shear Stress Distribution 3.4 Time Averaged Wall Shear Stress 3.5 Oscillatory Shearing Index 4 Conclusion References Analysis and Prediction of COVID-19 Spread in Ernakulam District, Kerala 1 Introduction 2 Epidemiology of COVID-19 3 Methodology 4 Data Analysis 5 Cases Among Vaccinated 6 Prediction Model 7 Conclusion References Optimization Techniques Solar Water Pumping System Design and Analysis-A Numerical Study at Dum Dum, Kolkata 1 Introduction 2 Methodology 3 Validation 4 Result and Discussion 4.1 Site Location 4.2 Simulation Input Parameter 5 Conclusion References A Model for Prediction of Water Level and Pressure in an Industrial Boiler Using Multivariate Regression 1 Introduction 2 Literature Review 3 Methodology 4 Results and Discussions 5 Conclusion References Optimisation of Parameters in Numerical Simulation of Hot Forging Using Taguchi Approach 1 Introduction 2 Simulation Modeling 2.1 Forging Material 2.2 Design of Experiment 2.3 Forging Simulation Model 2.4 Main Effects Plot and S/N Ratio 3 Results and Discussion 4 Conclusion References Selecting the Optimum Tool for Driving Performance Evaluation by Assessing the Ergonomic Methods—An Overview 1 Introduction 2 Human Factors in Heavy-Duty Vehicle Driving 2.1 Long Driving Hours 2.2 Poor Human–Machine Interface (HMI) 2.3 Incorrect Driving Posture 2.4 Vibration and Bad Roads 2.5 Driver Sleepiness 2.6 Age of the Driver 3 Ergonomic Methods for Assessing Exposure to Driving Risk Factors 4 The Development of an Integrated Ergonomic Tool—Digital Human Model (DHM) 5 Conclusions References Optimization of Geometrical Parameters in Magnetorheological Dampers Using Finite Element Modeling 1 Introduction 2 Magnetorheological Damper 2.1 Magnetorheological Fluids 2.2 MR Dampers 2.3 Developing Yield Stress in MR Fluid 3 Methodology 3.1 Modeling and Analysis of a MR Damper 3.2 Main Effects Plot and S/N Ratio 4 Results and Discussion 5 Conclusion References Academic Performance Prediction of Postgraduate Students Using Artificial Neural Networks 1 Introduction 2 Background of the Study 3 Methodology 3.1 Data Preprocessing 3.2 Factor Analysis 3.3 ANN Model Development 4 Results and Discussion 5 Conclusion References Internet of Things-Based Attendance Management System 1 Introduction 1.1 Salient Aspects of Attendance Management System 1.2 IoT–Internet of Things 1.3 Major Components of IoT 2 Background Study 2.1 Highlights from the Background Research 2.2 Inference Drawn from Background Study 3 Proposed System Methodology 3.1 Components 3.2 Fingerprint Recognition 3.3 Face Detection 4 Working Process 4.1 System Configuration 5 Conclusion 5.1 Highlight of the Work 5.2 Scope for Future Work References Patient Flow Optimization in an Emergency Department Using SimPy-Based Simulation Modeling and Analysis: A Case Study 1 Introduction 2 Literature Review 3 Research Methodology 4 Simulation Model Development 5 Metamodel-Based Optimization 5.1 Multiple Linear Regression Metamodel 5.2 Optimization 6 Results and Discussion 7 Conclusion References Computation in Fluid Flow and Heat Transfer Comparison of Simple Probabilistic Approach with Deterministic Model for Predicting Surge and Leakage in Water Pipelines 1 Introduction 2 Transient Pipe Flow Equations 2.1 Continuity Equations 2.2 Transient Momentum Equation 2.3 The Method of Characteristics 2.4 Discretization 3 Test Model for Pipe Flow Computations 3.1 Boundary Conditions 4 Methodology 4.1 Deterministic Model 4.2 Probabilistic Model 4.3 Inner Nodes with Leakage 5 Results 5.1 Transients on Valve Closure 6 Conclusion References Design and Analysis of Liquid-Cooled Battery Thermal Management System of Electric Vehicles 1 Introduction 2 Methodology 2.1 Design 2.2 Simulation 3 Results and Discussion 3.1 Discharge Only 3.2 Charge–Discharge Cycle 4 Conclusion References Numerical Analysis to Investigate the Effect of Solidification Parameters on the Pull-In Effect of Continuous Casting 1 Introduction 2 Methodology 2.1 Computational Domain and Mesh 2.2 Governing Equations and Boundary Condition 3 Results and Discussion 3.1 Temperature 690 ℃ and Casting Speed 65 mm/min 3.2 Temperature 700 ℃ and Casting Speed 55 mm/min 3.3 Temperature 715 ℃ and Casting Speed 75 mm/min 4 Conclusion References Mathematical Modeling of a Skin Condenser with Angular Contact for Domestic Refrigerator 1 Introduction 2 Heat Path Analysis of Skin Condenser 3 Heat Path Analysis of Skin Condenser with Angle 4 Conclusion References Aerodynamic Analysis of Deployable Wing Arrangement for Space Shuttle 1 Introduction 2 Materials and Methods 2.1 Geometry Acquisition 2.2 Mesh Generation 2.3 Flow Analysis 2.4 Grid Independency Analysis 3 Wing Design 3.1 Deployment Mechanism 3.2 Wing Deployment—Phases 3.3 Estimation of Wing Deployment Rate (WWR) 4 Space Shuttle Conceptual Design 5 Results and Discussions 5.1 Zeroth Phase (0°) 5.2 One-Quarter Phase (7.5°) 5.3 Half Phase (15°) 5.4 Three-Quarter Phase (22.5°) 5.5 Full Phase (30°) 6 Conclusion References Single Blow Characteristics of a Porous Spherical Bed Regenerator at Liquid Nitrogen Temperature 1 Introduction 2 Materials and Methods 3 Results and Discussion 4 Conclusion References Design, Development, and Numerical Analysis of Mist Nozzle and Its Impact on Performance Parameters of an Evaporative Cooler 1 Introduction 2 Development of Nozzle 2.1 CFD Analysis of Mist Nozzle 3 Experimentation 4 Result Analysis 5 Conclusion References