Proceedings of Fatigue, Durability and Fracture Mechanics

Description

This book presents the proceedings of Fatigue Durability India 2016, which was held on September 28–30 at J N Tata Auditorium, Indian Institute of Science, Bangalore. This 2nd International Conference & Exhibition brought international industrial experts and academics together on a single platform to facilitate the exchange of ideas and advances in the field of fatigue, durability and fracture mechanics and its applications. This book comprises articles on a broad spectrum of topics from design, engineering, testing and computational evaluation of components and systems for fatigue, durability, and fracture mechanics. The topics covered include interdisciplinary discussions on working aspects related to materials testing, evaluation of damage, nondestructive testing (NDT), failure analysis, finite element modeling (FEM) analysis, fatigue and fracture, processing, performance, and reliability. The contents of this book will appeal not only to academic researchers, but also to design engineers, failure analysts, maintenance engineers, certification personnel, and R&D professionals involved in a wide variety of industries. Front Matter ....Pages i-xii Finite Element Analysis-Based Approach for Stress Concentration Factor Calculation (Yuvaraj Hodhigere, Jyoti S. Jha, Asim Tewari, Sushil Mishra)....Pages 1-6 Evaluation of Viscoplastic Parameters of an Austenitic Stainless Steel at High Temperature (A. K. Asraff, Merin V. George, Krishnajith Jayamani, S. Sarath Chandran Nair)....Pages 7-28 Potentiality of Small Punch Test Using Damage Model to Generate J-R Curve of 20MnMoNi55 (Pradeep Kumar, B. K. Dutta, J. Chattopadhyay, R. S. Shriwastaw)....Pages 29-40 Experimental Facility for Thermal Striping Studies in Dynamic Sodium Environment (S. Vijayaraghavan, P. Rajasundaram, T. Chandran, M. Shanmugavel, B. Babu, P. Selvaraj)....Pages 41-52 Linear Elastic Fracture Mechanics (LEFM)-Based Single Lap Joint (SLJ) Mixed-Mode Analysis for Aerospace Structures (B. K. Mahesha, D. Thulasi Durai, D. Karuppannan, K. Dilip Kumar)....Pages 53-66 Study of Fatigue Crack Growth Rate of AA6061 at Different Stress Ratios (Rajesh P. Verma, K. N. Pandey)....Pages 67-74 Cooler Casing Fatigue Analysis: An ASME Approach (Prathapkumar Ramamoorthy, David K. Harper, Sam P. Joseph)....Pages 75-91 Failure Analysis of HSS Punch Tool: A Case Study (Suraj Desai, B. V. Dilip Kumar Bhat, Guruvinder Singh, G. J. Naveen, P. Rangasamy, B. Jayadeva et al.)....Pages 93-101 Evaluation of Fatigue Strength of Alloy Steel Pipe Under Influence of Hydrostatic Pressure (Deepak Kumar Rout, Raghu V. Prakash)....Pages 103-116 Estimation of Fatigue Life of Notched Specimens of P91 Steel by Analytical Approaches (J. Veerababu, Sunil Goyal, R. Sandhya, K. Laha)....Pages 117-128 Effect of Induced Residual Stress and Its Contribution to the Failure of an IC Engine Valve Material ( Gurunathan, Jitendra Sharma, Velshankar)....Pages 129-141 Fatigue Analysis of Offshore Structures in Indian Western Offshore (Nitin Nehra, Praveen Bhat, N. Panneerselvam)....Pages 143-151 Crack Effect on Rotors Using Mode-I Failure Model with Transfer Matrix Approach (Ved Prakash Singh, J. Srinivas)....Pages 153-165 Multiaxial Fatigue Analysis—Approach Toward Real-World Life Prediction (Pradip Pujari)....Pages 167-183 Effect of Loading Rate and Constraint on Dynamic Ductile Fracture Toughness of P91 Steel (S. Sathyanarayanan, Jashveer Singh, A. Moitra, G. Sasikala, S. K. Albert, A. K. Bhaduri)....Pages 185-201 Fatigue Life Prediction of Commercial Dental Implant Using Analytical Approach and Verification by FEA (Pankaj Dhatrak, Uddhav Shirsat, Vijay Deshmukh, S. Sumanth)....Pages 203-212 Layered Microstructure Generated by Multipass Friction Stir Processing in AZ91 Alloy and Its Effect on Fatigue Characteristics (Raja Allavikutty, Vivek Pancholi, Banu K. Mishra)....Pages 213-222 Grain Refinement Mechanism and Its Effect on Strength and Fracture Toughness Properties of Al–Zn–Mg Alloy (P. K. Mandal)....Pages 223-236 Evolution of Tertiary Carbides and Its Influence on Wear Behavior, Surface Roughness and Fatigue Limit of Die Steels (Tarang Shinde, N. B. Dhokey)....Pages 237-252 Lakshya: Life Assessment, Extension and Certification (Manu Jain, S. Rajashekar, V. Ashok Rangan, V. Subramanian)....Pages 253-266 Creep–Fatigue Damage Evaluation of 2.25Cr-1Mo Steel in Process Reactor Using ASME-NH Code Methodology (Sagar R. Dukare, Nilesh R. Raykar)....Pages 267-281 Analysis and Design Optimization for Improved Fatigue Life of One-Way Clutch Drive Used in Starter Motor (Varatharaj Neelakandan, Bharath Kumar, Thulasirajan Ganesan, Praveen Chakrapani Rao)....Pages 283-298 Creep–Fatigue Assessment for Interaction Between IHX Seal Holder and Inner Vessel Stand Pipe in a Pool-Type Fast Reactor as Per RCC-MR (Sanjay Kumar Pandey, S. Jalaldeen, K. Velusamy, P. Puthiyavinayagam)....Pages 299-306 Probabilistic Fatigue Life Estimation of Plate with Multiple Stress Concentration Zones (T. Sivaranjani, K. Abhirama, M. Manjuprasad)....Pages 307-322 Creep–Fatigue Interaction Study on Gas Turbine Engine Alloy (Neeta Paulose, D. Chandru Fernando, Amborish Banerjee, J. K. Sahu, S. N. Narendra Babu)....Pages 323-333 Evaluation of Implicit Reliability Level Associated with Fatigue Design Criteria of Nuclear Class-1 Piping (J. Mishra, V. Balasubramaniyan)....Pages 335-350 The Tensile Fatigue Behaviour of Aligned MWNT/Epoxy Nanocomposites (Sasidhar Jangam, A. Hema Devi, S. Raja, K. Hemachandra Reddy, G. Vijay Kumar)....Pages 351-359 Thermo-Mechanical Creep and Recovery of CTBN–Epoxy Shape Memory Polymers Under Saline Environment (A. Revathi, M. Sendil Murugan, Sandhya Rao)....Pages 361-368 Fatigue Life Estimation of Components Mounted on PCB Due to Vibration (Debadatta Mishra, Manish Trikha, D. Kamesh, K. Venkatesh, M. Ravindra)....Pages 369-379 Modified Rainflow Counting Algorithm for Fatigue Life Calculation (Vaibhav Shinde, Jyoti Jha, Asim Tewari, Sushil Miashra)....Pages 381-387 Damage Prognosis of Plain Concrete Under Low-Cycle Fatigue Using Piezo-Based Concrete Vibration Sensors (Anjaneya Dixit, Abhinav Bindal, Suresh Bhalla)....Pages 389-396 Asymmetric Cyclic Behaviour of Fine- and Coarse-Grained Commercially Pure Copper and Aluminium (Jayanta Kumar Mahato, Partha Sarathi De, Amrita Kundu, Pravash Chandra Chakraborti)....Pages 397-411 High-Temperature Fatigue Crack Growth Behaviour of SS 316LN (M. Nani Babu, G. Sasikala, Shaju K. Albert)....Pages 413-422 Numerical Simulation of Fracture in Coatings Subjected to Sudden Temperature Change Using Element-Free Galerkin Method (Sahil Garg, Mohit Pant)....Pages 423-431 Measurement of Residual Stress Distribution and Fatigue Life Assessment of Similar and Dissimilar Butt-Welded Joint (Varun Ravichandran, E. R. Revanth, D. Varun Kumar, M. Sandeep, A. Harish)....Pages 433-443 Fatigue Life Prediction of Spot Welded Joints: A Review (Vipin Wagare)....Pages 445-455 Crystal Orientation Effect on SIF in Single Crystals: A Study Based on Coupled Framework of XFEM and Crystal Plasticity Model (Rajwinder Singh, Dhiraj K. Mahajan)....Pages 457-471