CCIE Routing and Switching v5.1 Foundations: Bridging the Gap Between CCNP and CCIE (Practical Studies)

Description

CCIE-level Cisco routing and switching guide for every CCNP Preparing for the CCIE Routing and Switching lab exam typically involves deep and lengthy study. But if you already possess the Cisco CCNP Routing and Switching certification, you already know much of what you’ll need to succeed on CCIE’s labs. This book will help you quickly bridge your remaining knowledge gaps and make the most of everything you already know. CCIE Routing and Switching v5.1 Foundations addresses every segment of the CCIE R&S Version 5 blueprint, helping you focus your study where it will do the most good: intense hands-on practice to deepen your current knowledge and thorough explanations of theoretical topics you haven’t yet encountered. Based on the author’s industry-recognized CCIE prep classes, it includes 40+ detailed labs for real gear and platform emulators; structured illustrations of protocol and feature operation; and topic-specific labs to drive the theory home. It includes a full lab walkthrough of a complex configuration reflective of the actual CCIE–ensuring that you thoroughly understand the technologies and interactions you’re reading about. Discover the physical topology for any network deployment Master Spanning Tree Protocol (STP) foundations and advanced features Deploy and optimize PPP and use its full set of capabilities Implement Dynamic Multipoint VPNs (DMVPNs) from start to finish Use IP Prefix lists in prefix filtration, packet filtering, and other applications Handle any RIPv2 deployment scenario n Implement EIGRP, including classical and named operation modes and interoperation Use advanced OSPF techniques, including route filtration, LSA operation, stub configurations, and update filtering Understand what happens when you perform redistribution, and manage problematic scenarios Manage complex BGP capabilities, including Adjacency State Machine Operate IPv6 in complex network environments, including DMVPN Focus on QoS mechanisms that CCIE still covers, including traffic marking, classification, policing, and shaping Deploy IPsec VPN solutions including GRE/IPSec tunnel mode, multi-site VPN technologies, and their encryption Implement multicasting in environments requiring end-to-end IPv4 and IPv6 transport Address operational and deployment issues involving MPLS VPNv4 tunnels Cover Title Page Copyright Page About the Author Dedication Contents Introduction Chapter 1 Physical Topology Physical Layout of Switching Devices Serial Interconnections Between Routers Lab Options Summary Chapter 2 Physical and Logical Topologies Topology Types Lab 2-1: Introductory Lab Lab 2-2: Physical-to-Logical Topology Task 1 Task 2 Task 3 Summary –)ª_$Êè³;±à„‚ˇdng Tree Protocol Lab 3-1: Basic Spanning Tree Protocol (802.1D) Task 1 Task 2 Task 3 Task 4 Task 5 Lab 3-2: Advanced Spanning Tree Protocol (802.1D) Task 1 Task 2 Task 3 Task 4 Task 5 Task 6 Task 7 Task 8 Task 9 Task 10 Lab 3-3: Rapid Spanning Tree Protocol (802.1w) 802.1w Port States 802.1w Port Roles Operational Enhancements of 802.1w 802.1w Rapid Convergence Mechanisms Lab Setup Task 1 Task 2 Task 3 Task 4 Task 5 Task 6 Lab 3-4: Multiple Spanning Tree Protocol (802.1s) MST Regions MST Region Components MST Spanning Tree Instances Internal Spanning Tree (IST) IST Master Hop Count Multiple-Instance Spanning Tree Protocol (MSTP) Task 1 Task 2 Task 3 Task 4 Task 5 Lab 3-5: Spanning Tree PortFast Task 1 Task 2 Task 3 Task 4 Task 5 Lab 3-6: UplinkFast Task 1 Task 2 Lab 3-7: BPDU Guard Task 1 Task 2 Task 3 Task 4 Lab 3-8: BPDU Filter Task 1 Task 2 Task 3 Task 4 Lab 3-9: Spanning Tree Backbone Fast Task 1 Task 2 Lab 3-10: Spanning Tree Root Guard Task 1 Task 2 Lab 3-11: Spanning Tree Loop Guard Task 1 Task 2 Chapter 4 Point-to-Point Protocol Introduction to PPP PPP Frame Format PPP Control Plane Link Control Protocol and Basic PPP Session Establishment Authentication Phase and Authentication Mechanisms Network Control Protocols and Network Layer Protocol Phase Advanced PPP Features Compression Multilink PPP PPP over Ethernet Lab 4-1: PPP Task 1 Task 2 Task 3 Task 4 Task 5 Task 6 Task 7 Task 8 Task 9 Task 10 Task 11 Task 12 Task 13 Summary Chapter 5 DMVPN Lab 5-1: DMVPN Phase 1 Using Static Mapping Task 1 Task 2 Lab 5-2: DMVPN Phase 1 Using Dynamic Mapping Task 1 Task 2 Lab 5-3: DMVPN Phase 2 Using Static Mapping Task 1 Task 2 Lab 5-4: DMVPN Phase 2 Using Dynamic Mapping Task 1 Task 2 Lab 5-5: DMVPN Phase 3 Task 1 Task 2 Chapter 6 IP Prefix-List Lab 6-1: Configuring Prefix Lists Task 1 Task 2 Task 3 Task 4 Task 5 Task 6 Task 7 Task 8 Task 9 Task 10 Task 11 Chapter 7 EIGRP Lab 7-1: EIGRP Task 1 Task 2 Task 3 Task 4 Task 5 Task 6 Lab 7-2: EIGRP Named Mode Task 1 Task 2 Task 3 Task 4 Task 5 Task 6 Task 7 Task 8 Task 9 Task 10 Task 11 Task 12 Lab 7-3: EIGRP Metrics (Classic and Wide) Task 1 Task 2 Task 3 Task 4 Task 5 Task 6 Task 7 Lab 7-4: EIGRP Summarization Task 1 Task 2 Task 3 Task 4 Task 5 Task 6 Task 7 Task 8 Task 9 Lab 7-5: EIGRP Authentication Task 1 Task 2 Task 3 Task 4 W\RŠÇ&Òp Task 1 Task 2 Option #1 Option #2 Option #3 Option #4 Lab 7-7: EIGRP Stub Task 1 Task 2 Task 3 Task 4 Task 5 Task 6 Task 7 Task 8 Task 9 Task 10 Chapter 8 OSPF Lab 8-1: Advertising Networks Task 1 Task 2 Task 3 Task 4 Task 5 Task 6 ßt[væ™L'µÀðPa¢¨oadcast Networks Task 1 Task 2 Lab 8-3: Non-Broadcast Networks Task 1 Lab 8-4: OSPF Point-to-Point Networks Task 1 ÔEÓ«Ù=R6flñq¯+ÖŠ£ ıÌS)½®Œ›