Mechanics of Composite, Hybrid and Multifunctional Materials, Volume 5: Proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics

Description

Mechanics of Composite, Hybrid, and Multifunctional Materials, Volume 5 of the Proceedings of the 2018 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the fifth volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including: Recycled Constituent Composites Nanocomposites Mechanics of Composites Fracture & Fatigue of Composites Multifunctional Materials Damage Detection & Non-destructive Evaluation Composites for Wind Energy & Aerospace Applications Computed Tomography of Composites Manufacturing & Joining of Composites Novel Developments in Composites Front Matter ....Pages i-ix Stimulus-Responsive Interfacial Chemistry in CNT/Polymer Nanocomposites (Frank Gardea, Zhongjie Huang, Bryan Glaz, Shashi P. Karna, Xiyuan Cheng, Zhiwei Peng et al.)....Pages 1-8 Devulcanized Rubber Based Composite Design Reinforced with Nano Silica, Graphene Nano Platelets (GnPs) and Epoxy for “Aircraft Wing Spar” to Withstand Bending Moment (A. B. Irez, E. Bayraktar, I. Miskioglu)....Pages 9-22 Study of Mechanical Characteristics of Banana and Jute Fiber Reinforced Polyester Composites (G. L. Easwara Prasad, B. E. Megha, B. S. Keerthi Gowda)....Pages 23-29 Toughening Mechanism in Epoxy Resin Modified Recycled Rubber Based Composites Reinforced with Gamma-Alumina, Graphene and CNT (A. B. Irez, E. Bayraktar, I. Miskioglu)....Pages 31-39 AlSi10Mg Nanocomposites Prepared by DMLS Using In-Situ CVD Growth of CNTs: Process Effects and Mechanical Characterization (P. Thompson, R. Poveda, I. Bezsonov, M. Rossini, D. Orthner, K. Cobb et al.)....Pages 41-46 Optimization of Surface Integrity of Titanium-Aluminum Intermetallic Composite Machined by Wire EDM (S. Ezeddini, E. Bayraktar, M. Boujelbene, S. Ben Salem)....Pages 47-57 Design of Cost Effective Epoxy + Scrap Rubber Based Composites Reinforced with Titanium Dioxide and Alumina Fibers (A. B. Irez, I. Miskioglu, E. Bayraktar)....Pages 59-66 Reinforcement of Recycled Rubber Based Composite with Nano-Silica and Graphene Hybrid Fillers (A. B. Irez, E. Bayraktar, I. Miskioglu)....Pages 67-76 Testing the 2-3 Shear Strength of Unidirectional Composite (Joel S. Fenner, Isaac M. Daniel)....Pages 77-84 Nondestructive Damage Detection of a Magentostricive Composite Structure (Michael Coatney, Asha Hall, Mulugeta Haile, Natasha Bradley, Jin Hyeong Yoo, Brandon Williams et al.)....Pages 85-87 Thermo-Mechanical Properties of Thermoset Polymers and Composites Fabricated by Frontal Polymerization (M. Yourdkhani, B. Koohbor, C. Lamuta, L. M. Dean, P. Centellas, D. G. Ivanoff et al.)....Pages 89-91 Design of Magnetic Aluminium (AA356) Composites (AMCs) Reinforced with Nano Fe3O4, and Recycled Nickel: Copper Particles (L-M. P. Ferreira, E. Bayraktar, I. Miskioglu, M-H. Robert)....Pages 93-100 Reinforcement Effect of Nano Fe3O4 and Nb2Al on the Mechanical and Physical Properties of Cu-Al Based Composites (L.-M. P. Ferreira, I. Miskioglu, E. Bayraktar, D. Katundi)....Pages 101-108 Recycled Ti-17 Based Composite Design; Optimization Process Parameters in Wire Cut Electrical Discharge Machining (WEDM) (Sonia Ezeddini, Mohamed Boujelbene, Emin Bayraktar, Sahbi Ben Salem)....Pages 109-125 Alternative Composite Design from Recycled Aluminum Chips for Mechanical Pin-Joint (Knuckle) Applications (D. Katundi, A. B. Irez, E. Bayraktar, I. Miskioglu)....Pages 127-135 Manufacturing of Copper Based Composites Reinforced with Ceramics and Hard Intermetallics for Applications of Electric Motor Repair Parts (G. Zambelis, E. Bayraktar, D. Katundi, I. Miskioglu)....Pages 137-145 Damping and Toughening Effect of the Reinforcements on the Epoxy Modified Recycled + Devulcanized Rubber Based Composites (A. B. Irez, E. Bayraktar, I. Miskioglu)....Pages 147-158 Impact and Post-impact Behavior of Composite Laminates Reinforced by Z-Pins (L. Francesconi, F. Aymerich)....Pages 159-167 Layered Jamming Multifunctional Actuators (Hugh A. Bruck, Ruben Acevedo, Jasmin Rohwerder, Lena Johnson, Satyandra K. Gupta)....Pages 169-179 2D Microscale Observations of Interlaminar Transverse Tensile Fracture in Carbon/Epoxy Composites (Austin J. Smith, Caitlin M. Arndt, Danielle Benson, Michael W. Czabaj)....Pages 181-183 Electro-Mechanical Response of Polymer Bonded Surrogate Energetic Materials with Carbon Nanotube Sensing Networks for Structural Health Monitoring Applications (Samantha N. Rocker, Nishant Shirodkar, Tanner A. McCoy, Gary D. Seidel)....Pages 185-193 Strength and Energy Absorption Capability of Porous Magnesium Composites Reinforced by Carbon Nanofibers (Huiru Xu, Qizhen Li)....Pages 195-200 Mechanical Characterization of Open Cell Aluminum Foams Using X-ray Computed Tomography (Kristoffer E. Matheson, Michael W. Czabaj)....Pages 201-203 Damage Detection and Visco-Elastic Property Characterization of Composite Aerospace Panels Using Ultrasonic Guided Waves (M. Capriotti, R. Cui, F. Lanza di Scalea)....Pages 205-208 Microscale Investigation of Transverse Tensile Failure of Fiber-Reinforced Polymer Composites (Caitlin M. Arndt, Paige DaBell, Michael W. Czabaj)....Pages 209-212 Optimization of Kerf Quality During CO2 Laser Cutting of Titanium Alloy Sheet Ti-6Al-4V and Pure Titanium Ti (B. El Aoud, M. Boujelbene, E. Bayraktar, S. Ben Salem)....Pages 213-219 A Study of the Surface Integrity of Titanium Alloy Ti-6Al-4V in the Abrasive Water Jet Machining Process (M. Douiri, M. Boujelbene, E. Bayraktar, S. Ben Salem)....Pages 221-228 Process Reliability of Abrasive Water Jet to Cut Shapes of the Titanium Alloy Ti-6Al-4V (M. Douiri, M. Boujelbene, E. Bayraktar, S. Ben Salem)....Pages 229-236 Optimization of the High Energy Milling Process of Chips of a Stainless Steel Using the Response Surface Modeling (Fábio Gatamorta, C. S. P. Mendonça, M. M. Junqueira, E. Bayraktar, B. G. Andrade, M. de L. M. Melo et al.)....Pages 237-242 Iron Contents on Recycle Aluminum and Influence on Mechanical Properties (Claudomiro Alves, Bruna Vilas Boas, Fábio Gatamorta)....Pages 243-247 Experimental Comparison of the Microstructure and Surface Roughness in CO2 Laser Cutting of the Titanium Alloy Ti–6Al–4V and the Pure Titanium Ti (B. El Aoud, M. Boujelbene, E. Bayraktar, S. Ben Salem, A. Boudjemline)....Pages 249-255 Influence of Crumb Rubber Reinforcement on the Properties of Medium Density Fiberboard (Libin K. Babu, Kunal Mishra, Raman P. Singh)....Pages 257-265 Sub-components of Wind Turbine Blades: Proof of a Novel Trailing Edge Testing Concept (Malo Rosemeier, Alexandros Antoniou, Catherine Lester)....Pages 267-274 Toughening Mechanisms on Recycled Rubber Modified Epoxy Based Composites Reinforced with Alumina Fibers (A. B. Irez, I. Miskioglu, E. Bayraktar)....Pages 275-282 Toughening Mechanisms on Recycled Rubber Modified Epoxy Based Composites Reinforced with Graphene Nanoplatelets (A. B. Irez, I. Miskioglu, E. Bayraktar)....Pages 283-290 Damage Accumulation in CMCs (B. Swaminathan, J. D. Kiser, A. S. Almansour, K. Sevener, S. Daly)....Pages 291-292 Investigating Intralaminar Crack Growth in Biaxially Stressed Composites (Jordan French, Jessica Christensen, Michael M. Czabaj)....Pages 293-294 Determination of Stress Free Temperature in Composite Laminates for Residual Stress Modeling (Brian T. Werner, Helena Jin, Timothy M. Briggs)....Pages 295-298 Calibration of a Simple Rate Dependent Elastic-Plastic Constitutive Model for a Toughened Carbon Epoxy Composite System (Brian T. Werner, Joseph D. Schaefer)....Pages 299-301 Imaging the Life-Cycle of CMCs Using High-Resolution X-Ray Computed Tomography (Peter J. Creveling, Noel LeBaron, Michael W. Czabaj)....Pages 303-306 Effect of Process Induced Residual Stress on Interlaminar Fracture Toughness on Hybrid Composites (Brian T. Werner, Kevin Nelson, Ciji Nelson)....Pages 307-310 Analysis of Interfaces in AA7075/ Recycled WC Particles Composites Produced via Liquid Route (Marina Ferraz Viana, Maria Helena Robert)....Pages 311-320 Investigation on Microstructure and Interfaces in Graded FE50007 / WC Composites Produced by Casting (Rodolfo Leibholz, Henrique Leibholz, Emin Bayraktar, Maria Helena Robert)....Pages 321-329 In-Situ Imaging of Flexure-Induced Fracture in Fiber-Reinforced Composites Using High-Resolution X-Ray Computed Tomography (Brian P. Wingate, Michael W. Czabaj)....Pages 331-334