Advances on Mechanics, Design Engineering and Manufacturing II: Proceedings of the International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing (JCM 2018)

Description

This book contains the papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2018), held on 20-22 June 2018 in Cartagena, Spain. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into six main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations. Front Matter ....Pages i-xviii Front Matter ....Pages 1-1 Efficiency and Reliability of Gravity Die Casting Models for Simulation Based Design (A. Vergnano, E. Brambilla, G. Bonfiglioli)....Pages 3-12 Integrating Sustainability in Product Development Projects (L. Diago, E. Lacasa, L. Urmente, I. Millán, J. L. Santolaya)....Pages 13-22 Methodology for a Sustainable Design of Product-Service Systems (I. Millán, E. Lacasa, A. Sánchez, L. Diago, J. L. Santolaya)....Pages 23-31 Human Factors Assessment for Comfort and Safety in the XCAT Powerboats Rules (S. Abrami, F. Cucinotta, E. Guglielmino, F. Sfravara)....Pages 32-40 Development of a Low-Cost Wearable Prevention System for Musculoskeletal Disorders Using Inertial Measurement Unit Systems (C. Cao, M. I. Rodríguez-Ferradas, A. Cazón-Martín, Paz Morer)....Pages 41-51 Fingers’ Biomechanical Analysis with Smartphone User Tests (P. Mitrouchev, J. Chen, F. Quaine)....Pages 52-61 An Impact Testing Machine Development for Helmets According to Several Standards (D. Ranz, R. Miralbes, D. Sánchez)....Pages 62-73 Well Planned Obsolescence and the Eco-Design (J. M. Paricio, J. A. Peña, R. Miralbes)....Pages 74-84 Experimental and Numerical Study of the Self-loosening of a Bolted Assembly (V. Rafik, B. Combes, A. Daidié, C. Chirol)....Pages 85-94 A New Approach for Machine-Tool Architecture Selection at Preliminary Design Stage (M. Lajili, H. Chanal, C. Bouzgarrou, E. Duc)....Pages 95-104 Measurement Device Design: Multipurpose Rain Gauge (M. C. Ladrón-de-Guevara-Muñoz, A. J. Sánchez-Martos, O. D. de-Cózar-Macías, E. B. Bláquez-Parra, I. Ladrón-de-Guevara-López)....Pages 105-122 Multifunctional Device for Bicycles (P. Lardón-Amat, O. D. de-Cózar-Macías, F. J. Castillo-Rueda, C. Ladrón-de-Guevara-Muñoz, L. Miravet-Garret)....Pages 123-133 Modeling and Development of a Prosthesis Inspired by the Anthropometry of the Hand (L. Dunai, I. Lengua, I. Capcanari, G. Peris-Fajarnés)....Pages 134-142 Adaptation in the Design of a Weighing Lysimeter for Use in Potato Crops (J. A. Nicolás-Cuevas, D. Parras-Burgos, L. Ruíz-Peñalver, J. M. Molina-Martínez)....Pages 143-151 Identification of the Main Contributors in the 3D Tolerances Assessment in Mechanical Transmissions (F. Gherardini, D. Panari, F. Leali)....Pages 152-161 Front Matter ....Pages 163-163 A Virtual Kinematic Design of Dental Restorations Using Reverse Engineering (M. Iturrate, R. Minguez, N. Toledo, H. Eguiraun, I. De Prado, E. Solaberrieta)....Pages 165-173 Design of an Interactive Web Interface Using Graphics for Simulating and Assessing Visual Impact in Sustainable Building Projects (J. S. Jeong, A. Ramírez-Gómez)....Pages 174-183 Topology Optimization Additive Manufacturing-Oriented for a Biomedical Application (F. Cucinotta, E. Guglielmino, G. Longo, G. Risitano, D. Santonocito, F. Sfravara)....Pages 184-193 A Reverse-Engineering Approach for the Management of Product Geometrical Variations During Assembly (J. L. Gregorio, C. Lartigue, F. Thiébaut, H. Falgarone)....Pages 194-202 Free-State Shape of Aeronautical Components for Assembly Simulation (F. Gringoz, F. Thiébaut, C. Lartigue, B. Soufflet)....Pages 203-212 Analysis of the Virtual Facebow Transfer by Using a Facebow Fork. An In Vitro Study (E. Solaberrieta, M. Iturrate, J. A. Oriozabala, X. Amezua, L. Barrenetxea, O. Etxaniz)....Pages 213-224 Methodology for the 3D Reconstruction of Industrials Facilities Using Photogrammetry (R. Miralbes, H. Peña, J. A. Peña)....Pages 225-234 Visual Impact Assessment for Offshore Wind Farms Along the Cantabrian Coast (J. López-Uriarte, P. E. Lizcano, C. Manchado, V. Gómez-Jáuregui, C. Otero)....Pages 235-241 Graphic Survey and 3D Virtual Restoration of a 16th Century Watch Tower: Navidad Tower (Cartagena, Spain) (J. García-León, J. Ros-Torres, G. Vázquez Arenas, P. E. Collado Espejo, J. Pérez Navarro, M. Ramos Martínez)....Pages 242-251 Design of a Two Arms Exoskeleton as Haptic Device for Virtual Reality Applications (D. Chakarov, I. Veneva, M. Tsveov, P. Mitrouchev, P. Venev)....Pages 252-262 3D Organic Modeling Using Hybrid Techniques with Polygons (C. López, J. A. Peña, R. Miralbés)....Pages 263-271 Study of the Cylindrical Symmetry Materials Dependence with the Temperature in a Nonlinear Heat Transfer by Network Method (M. Fernández, J. F. Sanchez-Pérez, F. Del Cerro)....Pages 272-281 Exploiting Augmented Reality to Display Technical Information on Industry 4.0 P&ID (A. Boccaccio, G. L. Cascella, M. Fiorentino, M. Gattullo, V. M. Manghisi, G. Monno et al.)....Pages 282-291 A Design Approach to Support BIM for Existing Structures (P. Cicconi, R. Raffaeli, A. Borghi)....Pages 292-300 A Procedure for Cutting Guides Design in Maxillofacial Surgery: A Case-Study (L. Ulrich, F. Baldassarre, F. Marcolin, S. Moos, S. Tornincasa, E. Vezzetti et al.)....Pages 301-310 An Integrated Approach for Shape Optimization with Mesh-Morphing (M. Calì, S. M. Oliveri, M. Evangelos Biancolini, G. Sequenzia)....Pages 311-322 Posture Evaluation for Fragment Re-Alignment of Ancient Bronze Statues: The Case Study of the Principe Ellenistico (M. Bici, R. Guachi, O. Colacicchi, G. D’Ercoli, F. Campana)....Pages 323-335 Review of Industrial Design Optimization by Genetic Algorithms (F. L. Sáez-Gutiérrez, F. J. F. Cañavate, A. Guerrero-González)....Pages 336-346 Front Matter ....Pages 347-347 Defining Scanning Trajectory for on-Machine Inspection Using a Laser-Plane Scanner (D. M. P. Nguyen, Y. Quinsat, C. Lartigue)....Pages 349-358 Use of Additive Manufacturing on Models for Sand Casting Process (C. Bermudo, S. Martín-Béjar, F. J. Trujillo, L. Sevilla)....Pages 359-369 Approach to the Management Applied to the Periodical Technical Inspection (PTI) Stations in the Context of Industry 4.0 (J. García-Cordonié, P. Izquierdo, J. A. Vilán, A. Segade, E. Casarejos, M. Lopez)....Pages 370-379 Influential Parameters in Plunge Milling for Titanium Alloy Ti-6Al-4V (M. Fredj, F. Monies, W. Rubio, J. Senatore)....Pages 380-390 A Model-Based Approach to Support the Design of Mold Heating for Composites (P. Cicconi, E. Pallotta, A. C. Russo, R. Raffaeli, M. Prist, A. Monteriù et al.)....Pages 391-401 New Issues for Workers Safety in the Factory of the Future (P. Martin, B. Daille-Lefèvre, J. Marsot, X. Godot, G. Abba, A. Siadat et al.)....Pages 402-411 3D Model Representation and Data Exchange for Additive Manufacturing (G. Savio, R. Meneghello, S. Rosso, G. Concheri)....Pages 412-421 Applying High Speed Video to Optimize the Performance of Milling Tools (C. García-Hernández, A. Martínez-Angulo, N. Efkolidis, P. Ubieto-Artur, J. L. Huertas-Talón, P. Kyratsis)....Pages 422-429 A Knowledge-Based Augmented Reality Tool for Managing Design Variations (L. Barbieri, E. Marino, F. Bruno)....Pages 430-439 Investigation of Aluminum Alloy Properties During Helical Roller Burnishing Through Finite Element Simulations and Experiments (L. Kamgaing Souop, A. Daidie, Y. Landon, J. Senatore, M. Ritou)....Pages 440-450 Topological Optimization of a Structural Naval Component Manufactured in FDM (A. Mancuso, G. Pitarresi, A. Saporito, D. Tumino)....Pages 451-462 The Influence of Build Orientation on the Flatness Error in Artifact Produced by Direct Metal Laser Sintering (DMLS) Process (S. Rizzuti, L. De Napoli, S. Ventra)....Pages 463-472 New Customized Elbow Orthosis Made by Additive Manufacturing (R. I. Campbell, T. Ingrassia, V. Nigrelli, V. Ricotta)....Pages 473-483 Front Matter ....Pages 485-485 Accuracy Assessment of CT-Based 3D Bone Surface Reconstruction (L. Puggelli, F. Uccheddu, Y. Volpe, R. Furferi, D. Di Feo)....Pages 487-496 Comparative Study of Mussel Shells Using 3D Scanning (H. Eguiraun, E. Gil-Uriarte, L. Barrenetxea, E. Lizundia, I. Zuazo, M. Soto)....Pages 497-504 VR Medical Treatments. A 15-Year Statistical Overview (J. M. Salmerón Núñez, R. García Sánchez, J. Ordoñez García)....Pages 505-516 Geometry Modelling of Regular Scaffolds for Bone Tissue Engineering: A Computational Mechanobiological Approach (A. Boccaccio, M. Fiorentino, M. Gattullo, V. M. Manghisi, G. Monno, A. E. Uva)....Pages 517-526 Parenthood Perception Enhancement Through Interaction with 3D Printed Fetal Face Models (D. Speranza, F. Padula, B. Motyl, S. Tornincasa, F. Marcolin, E. Vezzetti et al.)....Pages 527-535 System of Precision Osteotomy in Bone Reconstruction Surgery: PUVACO (C. M. Baño, P. Puertas, B. Abellán Rosique)....Pages 536-541 3D Simulation of Hazelnut Chopping—A Geometrical Study Compared with Experimental Results (C. Conigliaro, S. Tornincasa, V. Vicentini)....Pages 542-551 Surgical Planning in Shoulder Prostheses with 3D Reconstruction and Customized 3D Guides (C. M. Baño, J. F. Abellán, E. Melendreras, B. Abellán Rosique)....Pages 552-563 Combined Urban Furniture Designed by a Bio-Inspired Approach (D. Parras-Burgos, J. Hernández, J. S. Velázquez, F. Cavas-Martínez, F. J. F. Cañavate, D. G. Fernández-Pacheco)....Pages 564-572 Tumor Reconstructive Surgery Assisted by Scale Models Using 3D Printing (D. Parras-Burgos, P. Puertas García-Sandoval, C. Baño Pedreño, F. Cavas-Martínez, F. J. F. Cañavate, D. G. Fernández-Pacheco)....Pages 573-582 Front Matter ....Pages 583-583 Eco-Ideation Workshops: Definition and Requirements (I. López-Forniés, J. Sierra-Pérez)....Pages 585-595 Modular Design: Product Design Opportunities and a Case Analysis (L. Asión-Suñer, I. López-Forniés)....Pages 596-609 Is the Design a Vector to be Considered in the Agri-food Industry? An Interprofessional Analysis in Andalusia (Spain) (Ó. González-Yebra, M. A. Aguilar, F. J. Aguilar)....Pages 610-621 Description of Moisture Thermal Patterns in Concrete for the Thermal Inspection Method by Infrared Thermography (P. Cárdenas-Del Campo, F. Soto-Lara, M. Marín-Granados)....Pages 622-631 Joint Development of Video Mapping Contents on the Industrial and Cultural Heritage of Zaragoza (Spain) (F. J. Galán-Pérez, A. Biedermann)....Pages 632-638 Service Design and Sound: A Chance for Exploration in Oncological Treatment Rooms (R. Sanz-Segura, C. Romero-Piqueras, E. Manchado-Pérez, E. Özcan)....Pages 639-648 Form and Function: Functional Optimization and Additive Manufacturing (L. Barbieri, F. Calzone, M. Muzzupappa)....Pages 649-658 New Bottling Machine for Different Glass Jar Geometries in Continuous Processes (F. Cateura, J. S. Velázquez-Blázquez, F. Cavas-Martínez, D. Parras-Burgos, F. J. F. Cañavate, J. Nieto)....Pages 659-669 Moving Away from the Basic, Adopting a New Approach to the Creative Process (J. C. Quiñones-Gómez)....Pages 670-679 Front Matter ....Pages 681-681 Proposal About the Introduction of the Soft Skills in the Teaching of Product Development (E. Rovida, G. Zafferri)....Pages 683-695 Which Didactic Methodology Is the Most Appropriate for My Subject? (J. López, I. Herrero, P. Jimbert, M. Iturrondobeitia, N. Toledo)....Pages 696-704 Integrated Approach to the Innovation of Technical Drawing Teaching Methods (G. Baronio, I. Bodini, A. Copeta, L. Dassa, B. Grassi, R. Metraglia et al.)....Pages 705-713 Are We Training Our Novices Towards Quality 2D Profiles for 3D Models? (C. González-Lluch, R. Plumed)....Pages 714-721 An Analysis of Supervised Practical Work as a Didactic Methodology in the Subject of Graphic Expression in Engineering (L. Diago Ferrer)....Pages 722-731 Content Management System for the Dissemination of Research Results on Agustín de Betancourt’s Historical Inventions (J. I. Rojas-Sola, A. I. Aguilera-García)....Pages 732-741 WebGL for the Dissemination of Research Results on Agustín de Betancourt’s Historical Inventions (J. I. Rojas-Sola, A. I. Aguilera-García)....Pages 742-750 Free Software Usage in Subjects of the Industrial Design and Product Development Engineering Degree (N. Muñoz-López, A. Biedermann, A. Serrano-Tierz, F. J. Galán-Pérez)....Pages 751-760 Education for the Industry of the Future (IoF) with the 3D Experience Platform (V. Gomez-Jauregui, F. Cue-Palencia, C. Manchado, C. Otero)....Pages 761-769 A Guide for Learning Design Practice (R. Sanz-Segura, A. Fernández-Vázquez, E. Manchado-Pérez, I. López-Forniés)....Pages 770-779 Improving Spatial Abilities and Comprehension in Technical Drawing Students Through the Use of Innovative Activities and Augmented Reality (E. Olvera-García, M. D. Marín-Granados, F. J. Ortíz-Zamora)....Pages 780-788 Implementation of Learning by Doing Method in the Graphical Engineering Field (M. D. Marín-Granados, E. B. Bláquez-Parra, P. Mora-Segado, L. Miravet-Garret, F. J. Ortiz-Zamora, F. Gómez-Hermosa et al.)....Pages 789-797 Project-Based Learning of CAD/CAE Tools for the Integrated Design of Automatic Machines (G. Berselli, P. Bilancia, R. Razzoli)....Pages 798-809 Fostering Non-technical Skills for Future Engineers: Labour Reality in the Graphic Expression Subject (N. Toledo, J. Lopez, P. Jimbert, M. Iturrondobeitia, I. Herrero)....Pages 810-824