Innovative Technologies for Printing and Packaging

Description

This book includes original, peer-reviewed research papers from the 13th China Academic Conference on Printing and Packaging (CACPP 2022), held in Jinan, China, on November 10-12, 2022. The proceedings cover the recent findings in color science and technology, image processing technology, digital media technology, mechanical and electronic engineering and numerical control, materials and detection, digital process management technology in printing and packaging, and other technologies. As such, the book is of interest to university researchers, R&D engineers, and graduate students in the field of graphic arts, packaging, color science, image science, material science, computer science, digital media, network technology, and smart manufacturing technology. Committees Preface Contents Color Science and Technology Testing the Performance of the CIECAM16 for Cross-Media Colour Reproduction Using Real Scene Experiment 1 Introduction 2 Methods 3 Results 4 Conclusions References Colour Matching Results from Two Distinct Observers via a Visual Trichromator System 1 Introduction 2 Experimental 3 Results 4 Conclusion References Analysis of Consumers’ Emotional Preference for Color Reproduction on Mobile Phone Screens 1 Introduction 2 Visual Psychophysical Experiments 2.1 Experimental Light Environment 2.2 Observers 2.3 Mobile Phone and Clothing Colors 2.4 Questionnaire 2.5 Experimental Process 3 Results and Discussion 3.1 Data Stability Analysis 3.2 Analysis of Emotional Preference for Atmosphere Perception in Lighting Environment 3.3 Analysis of Emotional Preference of Psychological Perception 4 Conclusion References Camera Spectral Sensitivity Estimation Based on a Display 1 Introduction 2 Method 3 Experiment 4 Results and Discussion 5 Conclusion References Prints Clarity Evaluation Indexes Spatial Frequency Response 1 Introduction 2 Printing SFR and Measurement Techniques 2.1 Spatial Frequency Response 2.2 SFR Measurement Method 3 SFR Measurement Practice 3.1 SFR Curve 3.2 SFR Quality Index 4 Conclusions References Investigation of Parametric Colour Difference on Physical Size Effect for Sample Pairs with Separation 1 Introduction 2 Methods 2.1 Apparatus 2.2 Sample Preparation 2.3 Visual Assessment 3 Results and Discussion 3.1 Observer Variation 3.2 Physical Size Effect 3.3 Comparison of CMFs 3.4 Model Performance 4 Conclusion References A New Black Generation Algorithm for Color Printing 1 Introduction 2 Algorithm Principle 2.1 Algorithm Framework 2.2 Tone Piecewise Strategy 2.3 Principle of Black Generation Algorithm 3 Experimental Results and Analysis 3.1 Evaluation of Color Reproduction Accuracy 3.2 Image Reproduction Effect Evaluation 4 Conclusions References Optimization of Standard Object Color Spectrum Database Based on Human Eye Color Discrimination Threshold Cycle Algorithm 1 Introduction 2 Method 3 Experiment and Process 3.1 Data Sources 3.2 Human Eye Color Discrimination Threshold 4 Results and Discussion 5 Conclusion References Solution to the Reproduction of Multiple Pantone Colors on Six-Color Offset Press 1 Introduction 2 Technical Difficulties for Printing Multiple Pantone Colors on the Six-Color Press 2.1 Defects of Printing All Pantone Color as Spot Color 2.2 Defects of Printing All Pantone Color as C, M, Y, K Colors 3 Solution for Reproduction Multiple Pantone Colors on the Six-Colors Press 3.1 Reproduction of Auxiliary Colors 3.2 Reproduction of Main Colors 3.3 Color Test 4 Conclusion References Application Research for the Printing Process of Spot Color on the Product Packaging 1 Introduction 2 Ink Color Control Method for Spot Color 2.1 Solid Ink Control for Spot Color 2.2 Dot Ink Control for Spot Color 3 Ink Color Control Process for Spot Color 3.1 Solid Ink Process for Spot Color 3.2 Spot Color Dot Ink 4 Conclusion References Multi-output Least-Squares SVR Spectral Reflectance Reconstruction Model Based on Differential Evolution Optimization 1 Introduction 2 Spectral Reflectance Reconstruction Method Based on Differential Evolution LSSVM 2.1 Principle of Least Squares Support Vector Machine 2.2 Differential Evolution Algorithm 2.3 Characterization Model of Image Input Device Based on Differential Evolution Least Squares Support Vector Regression 3 Experimental Verification and Analysis 4 Conclusion References Calibration of Gray Balance for Fluorescent Inkjet Image Based on Spectral Calculation 1 Introduction 2 Experimental 2.1 Materials and Instruments 2.2 Experimental Methods 3 Result and Discussion 3.1 Photophysical Properties of Fluorescent Inkjet Inks on Different Substrates 3.2 Calculation of Color Light-Gray Balance of Fluorescent Inkjet Ink and Curve Verification 4 Conclusions References Spectral Reflectance Reconstruction of Organic Tissue Based on Camera Responses 1 Introduction 2 Proposed Method 2.1 Lattice-Based Regression LUT 3 Experiment and Discussion 3.1 Sample Acquisition and Screening 3.2 Results and Analysis 4 Conclusions References Digital Media Technology Research and Application of Multi-dimensional Virtual Simulation Packaging Based on AR Technology 1 Introduction 2 System Overall Framework Design 2.1 Development Environment 2.2 Design Ideas 2.3 Key Technology 2.4 System Framework Design 3 Development and Implementation of System 3.1 AR Paper Brochure Design 3.2 Design and Production of Multimedia Resources 3.3 Build a Database 3.4 Design and Implementation of Each Function of the System 4 Test and Release 5 Conclusion References App Design and Research Based on Traditional Art Intangible Cultural Heritage 1 Role of APP in the Protection of Intangible Cultural Heritage 2 APP Design 2.1 Conception of “Intangible Cultural Heritage” APP Interface Interaction 2.2 Realistic Reproduction 2.3 360° Virtual Browsing 2.4 Combination of Narrative and Interactive Experience Increases the User’s Operational Viscosity 3 Research Approach 3.1 Prototype Design 3.2 User Interface Visual Design 4 Conclusion References Design and Application of an APP for Intangible Cultural Heritage Based on Cultural Translation 1 Traditional Culture Communication in the Context of Mobile Internet 1.1 Application of Traditional Cultural Elements in APPs 1.2 Problems Existing in Traditional Cultural APPs 2 Concept of Cultural Translation 3 Levels of Traditional Cultural Transcription and Design Applications 3.1 Physical Translation of Traditional Culture 3.2 Behavioral Translation of Traditional Culture 3.3 Spiritual Translation of Traditional Culture 4 Conclusion References Printing Engineering Technology Fabrication and Performance of Spherical Ni(OH)2 Electrode Based on Screen Printing 1 Introduction 2 Experiment 2.1 Chemicals and Reagents 2.2 Preparation of the Ni(OH)2 Nanoball 2.3 Fabrication of the Screen-Printed Ni(OH)2 Electrodes 2.4 Characterization 3 Result and Discussion 3.1 Characterization of the Spherical Ni(OH)2 3.2 Electrochemical Performances 4 Conclusions References Research Progress in Carbon Nanotube Thin Film Transistors by Printing Technologies 1 Introduction 2 Semiconductor-Type Carbon Nanotube Separation Methods 2.1 Chemical Vapor Deposition Methods 2.2 Density Gradient Ultracentrifugation Methods 2.3 Gel Chromatography Separation Methods 2.4 Conjugated Polymer Wrapping Methods 2.5 Electrophoresis Methods 2.6 Two-Phase Extraction Methods 2.7 Free Radical Reaction Methods 3 Applications 3.1 Ultra-low-Power, Low-Voltage Transistor Devices and Circuits for the Internet of Things 3.2 Carbon Based Synaptic Transistor Devices for Artificial Intelligence 3.3 Stretchable Transistors Carbon Nanotubes and Circuits for Wearable Electronics 3.4 Irradiation-Resistant Electronic Devices and Circuits for Space Applications 4 Summary and Prospects References Simulation of Ink Droplet Spreading Based on XFlow 1 Introduction 2 Governing Equation 3 Fluid Simulation and Analysis 3.1 Flow Field Analysis 3.2 Influence of Different Parameters on Spreading Result 4 Conclusions References Structure Design of Braille Puzzles Based on 3D Printing Technology 1 Introduction 2 Methods 2.1 Structures of Raised Dots and Flat Dots 2.2 Structure of a Cell Box 2.3 Structure of a Storage Board 3 Experimental Results 4 Conclusions References Study on Morphology of Quantum Dots Films Prepared by Inkjet Printing 1 Introduction 2 Experimental Section 2.1 Material and Instrument 2.2 QD Ink Preparation 3 Result and Discussion 3.1 Effect of Solvent Ratio 3.2 Effect of Droplet Spacing 3.3 Effect of Inkjet Voltage 4 Conclusion References Research on Image Quality Control Technology of Pad Printing 1 Introduction 2 Experiments 2.1 Experiment Materials and Equipment 2.2 Sample Preparation 3 Result and Analysis 3.1 Influence of Pre Exposure Time on Printing Image Quality 3.2 Establishment of Color Density Compensation Curve for Image Originals 4 Conclusions References Research Progress on Thin Film Transistors Fabricated with Printing Technologies 1 Introduction 2 Overview of Transistors 2.1 Composition and Classification of Transistors 2.2 Transistor Structures 3 Fabrication of Transistors by Printing 3.1 Inkjet Printing 3.2 Aerosol Jet Printing 3.3 Screen Printing 3.4 Reverse Offset Printing 4 Prepare Materials for Transistors 4.1 Electrode Materials 4.2 Semiconductor Materials 4.3 Dielectric Materials 5 Summary and Outlook References Research on Influence of Vibration on Rubber Surface Friction 1 Introduction 2 Experimental Device and Materials 3 Results and Analysis 3.1 Relationship Between Friction and Time 3.2 Relationship Between Friction and Amplitude 4 Conclusions References Hydrodynamic Analysis of Coating Stability in Slot-Die Coating Processes 1 Introduction 2 Establishment of Mathematical Model and Theoretical Analysis 3 Numerical Simulation 3.1 Simulation Parameter Setting 3.2 Analysis of Simulation Results 4 Conclusion References Verification and Adjustment Method of ICC Applied in Xerographic Digital Printing 1 Introduction 2 Research Purpose and Current Research Situation 2.1 Research Purpose 2.2 Current Research Situation 3 Reasons and Solutions for Poor ICC Application 3.1 Reasons 3.2 Solutions 4 ICC Verification and Adjustment 4.1 Explanation 4.2 Steps to Verify 4.3 Adjusting the ICC 4.4 Results of the Experiment 5 Conclusion References Research on Collaborative Application of Parametric Design and 3D Printing Based on Complex Shape Packaging Container 1 Introduction 2 Collaborative Application of Parametric Design and 3D Printing, Analysis of Key Factors, Advantages, Disadvantages and Causes of Packaging Container (Prototype Development and Customization) Process 2.1 Parametric Design in Collaboration with 3D Printing for Packaging Containers (Prototype Development and Customization) Analysis of Strengths and Weaknesses in the Formulation Phase 2.2 Parametric Design and 3D Printing, Applied to Packaging Containers (Prototype Development and Customization) Material Selection and Process Stage Advantages and Disadvantages Analysis 2.3 Collaborative Parametric Design and 3D Printing for Data Acquisition (Data Modeling) and Model Generation of Packaging Containers (Prototype Development and Customization) 3 Analyze the Characteristics and Optimization of Parametric Design and 3D Printing Applied to Complex Packaging Modeling 3.1 Parametric Design and 3D Printing Collaborative Application Packaging Container, Can Present a Complex Fine Art, Personalized Features 3.2 Although 3D Printing Technology Has Certain Limitations, It Can Bring Some Optimization Inspiration to Packaging Modeling When Cooperating with Parametric Design 4 Conclusions 5 Concluding Remarks References Conductive Electrode Quality Research Based on Screen Printing Technology 1 Introduction 2 Experimental and Methods 2.1 Screen Printing Quality Key Parameters 2.2 Experimental Design and Measurement 3 Result and Analysis 3.1 Parameters Comparison 4 Conclusion References Analysis of Drying Characteristics of Suspension Oven Substrate Based on CFD 1 Introduction 2 Model Simulation 2.1 Model Analysis 2.2 Mathematical Model of Flow Field Simulation 2.3 Flow Field Simulation Analysis 3 Study on the Effect of Air Nozzle Slit Width Size on the Drying Characteristics of Substrates 3.1 Effect of Air Nozzle Slit Width on Substrate Pressure 3.2 Effect of Air Nozzle Slit Width on Substrate Temperature 3.3 Effect of the Air Nozzle Slit Width on the Wind Velocity on the Surface of the Substrate 4 Conclusions References Study on Quality Evaluation and Optimization Scheme of White Ink in Flexography 1 Introduction 2 Quality Evaluation of White Ink 2.1 Opacity of White Ink 2.2 Leveling of White Ink 3 Optimization of White Ink 3.1 Appropriate Anilox Engraving Specification 3.2 Appropriate Parameters of Plate Making and Printing Process 4 Conclusion References Packaging Engineering Technology Experimental Study on Leak Detection of Beverage Using Infrared Thermal Camera 1 Introduction 2 Experimental Method 3 Results and Discussions 3.1 Results of Hot Beverage 3.2 Results of Cold Beverage 4 Conclusions References Preparation of Durable Superhydrophobic Coating and Its Application in Moisture-Proof Paper Packaging 1 Introduction 2 Experimental 2.1 Experimental Materials and Instruments 2.2 Experiments 2.3 Testing and Characterization 3 Results and Discussion 3.1 Wetting Performance Analysis 3.2 SEM Analysis 3.3 Mechanical Stability of Superhydrophobic Filter Paper 3.4 Analysis of Moisture-Proof Performance 4 Conclusions References Study on the Adsorption Performance of Graphene for One-Component Solvent 1 Introduction 2 Graphene Adsorption Simulation Based on Material Studio 2.1 Adsorbent and Modeling 2.2 Adsorption Simulation 3 Result and Analysis 3.1 Analysis of Graphene Adsorption Properties 4 Conclusions References Study on Compressive Strength Calculation of Corrugated Boxes Based on Printing Impact 1 Introduction 2 Calculation of the Compressive Strength of Corrugated Boxes and Its “K” Factor 3 Experimental Research 3.1 Experimental Subjects 3.2 Test Method 3.3 Shape, Position and Color Arrangement of Printed Graphics on Cardboard Boxes 4 Results and Discussion 4.1 Effect of Printing Shape on the Compressive Strength of Corrugated Boxes 4.2 Effect of Printing on the Calculation of the Compressive Strength of Corrugated Boxes 5 Conclusions References Design of Structural Parameters and Its Effect on the Static Cushioning Performance of Paper Elliptic Porous Materials 1 Introduction 2 Processing of the Porous Materials Made of Paper with Elliptic Shape 2.1 Design of Pore Type of the Porous Materials 2.2 Processing Technology of the Porous Materials Made of Paper with Diamond Shape 3 Results and Analysis 3.1 Effect of Major–Minor Axis Ratio on the Static Cushioning Performance of Paper Elliptic Porous Materials 3.2 Effect of Paper Grammage on the Static Cushioning Performance of Paper Elliptic Porous Materials 3.3 Effect of Thickness on the Static Cushioning Performance of Paper Elliptic Porous Materials 4 Conclusions References Research on Temperature Monitoring Method of a New Type of Medical Carrying Case 1 Introduction 2 Experimental Method 3 Results and Discussions 3.1 Temperature Comparison of Contacted and Uncontacted Thermocouples 3.2 Temperature Comparison Between the Thermocouple in Contact and Uncontacted 4 Conclusions References Mechanical Engineering Technology Research on Accurate Positioning of Unwinding and Splicing Position Based on Curve Fitting 1 Introduction 2 Unwind Tower Rotation Position Mould and Derivation of Geometric Relation 2.1 Unwind Tower Rotation Position Mould 2.2 Unwind Tower Derivation of Geometric Relation 3 Nonlinear Least Square Fitting Based on Polynomial Basis Function 4 Practical Application Effect 5 Conclusion References Study on the Influence of Input Fluctuation on Mixing Effect 1 Introduction 2 Arc Gear Pump Output Flow Analysis 3 Influence of Input Fluctuation on Mixing Effect 3.1 Pretreatment of Simulation Calculation 3.2 Simulation of Mixing Process in a Static Mixer with Different Rotating Differential Rows 3.3 Simulation of Mixing Process in a Static Mixer with Co-rotating Differential Rows 4 Conclusion References Study on the Hot Air Flow Field of TAC Membrane Dehalogenizing Oven Based on Fluent 1 Introduction 2 Simulation Analysis 2.1 Modeling of Dehalogenizing Oven 2.2 Fluid Simulation 2.3 Results of the Simulation 2.4 Discussion of the Simulation Results 3 Installation Test 4 Conclusion References Research on Digital Design Platform of Gravure Printing Press 1 Introduction 2 Overall Design of the Platform 3 Parametric Design 3.1 Parametric Modeling 3.2 Automatic Assembly 3.3 Engineering Drawing Conversion 4 Finite Element Analysis 4.1 Establish Finite Element Model 4.2 Load Solution 4.3 Result Analysis 4.4 Secondary Optimization 5 Conclusion References Rigid-Flexible Coupling Modeling and Dynamic Characteristic Analysis of Web Folding Mechanism 1 Introduction 2 Rigid-Flexible Coupling Dynamic Modeling of Folding Mechanism 2.1 Rigid Body Modeling of Folding Mechanism 2.2 Establishment of Flexible Parts for Folding Mechanism 2.3 Establishment of Rigid-Flexible Coupling Model for Folding Mechanism 3 Dynamic Characteristic Analysis of Folding Mechanism 3.1 Kinematic Analysis of Folding Four-Bar Mechanism 3.2 Relationship Determination of Lateral Displacement Deviation of Machete Head and Rotational Speed 3.3 Dynamic Analysis of Folding Four-Bar Mechanism 4 Conclusions References Residual Volume of Entrained Air in Wound Roll 1 Introduction 2 Analysis of Air Residual Volume 2.1 Model of Air Entrainment Squeeze Film 2.2 Incremental Solution Equation of the Radial Stress 3 Numerical Analysis 3.1 Increment of Radial Stress 3.2 Residual Volume of Entrained Air 4 Conclusions References Cooling Water Monitoring and Early Warning Device for Gravure Printing Machine Based on 51 Single Chip Microcomputer 1 Introduction 2 Monitoring and Early Warning System Program Design 2.1 Hardware Design of the System 2.2 System Software Design 3 Conclusion References Research on Control Algorithm of Solvent-Free Compound Mixing Ratio Based on Feedforward Control 1 Introduction 2 Analysis of Output Fluctuation of Arc Gear Pump 3 Feedforward Control Algorithm 4 Feedforward Control Algorithm for Stable Output Flow of Arc Gear Pump of Solvent-Free Compound Mixer 4.1 Decomposition and Linearization of Flow Fluctuation Signal 4.2 Simulation Calculation 5 Conclusion References Performance Analysis and Structure Optimization of Knife Folding Mechanism’s Machete Arm 1 Introduction 2 Strength Analysis of Folding Mechanism’s Machete Arm 2.1 Kinematic Analysis of Folding Four-Bar Mechanism 2.2 Dynamic Equation of Folding Four-Bar Mechanism 2.3 Stress Calculation of Machete Arm 3 Model Analysis of Folding Mechanism 3.1 Boundary Conditions Setting 3.2 Modal Analysis Results 3.3 Analysis on Vibration Characteristics of Folding Mechanism 4 Structural Improvement 4.1 Optimization Model Setting 4.2 Model Analysis of Machete Arm’s New Structure 5 Conclusions References Study on the Structure Optimization and Simulation Analysis of Oven System in Gravure Press 1 Introduction 2 Oven Structure and Simulation Analysis 2.1 Oven Structure 2.2 Simulation Analysis 3 Oven Structure Optimization and Simulation Analysis 3.1 Local Structure Optimization 3.2 Comparative Analysis Before and After Optimization 4 Experimental Verification 5 Conclusion References Environment Detection System of Printing and Packaging Workshop Based on NB-IOT 4GCAT1 1 Introduction 2 Overall System Design 2.1 System Composition 2.2 Measuring Principle 3 Circuit Design 3.1 System Power Circuit Design 3.2 MCU Circuit Design 3.3 Communication Circuit Design 3.4 Sensor Interface Circuit 4 System Software Design 5 Conclusion References Heat Transfer Analysis of Regenerative of VOCs Treatment Equipment in Printing and Packaging Enterprises 1 Introduction 2 Model and Boundary Conditions 2.1 Physical Model 2.2 Mathematical Model 2.3 Boundary Conditions 3 Numerical Simulation and Result Analysis 3.1 Analysis of Start-Up Process of Regenerator 3.2 Analysis of Stable Operation Stage of Regenerator 4 Effect of Key Parameters of Heat Transfer Performance of Regenerator 4.1 Regenerator Length 4.2 Regenerator Pore Size 4.3 Regenerator Wall Thickness 5 Conclusion References Research on Unwind and Splicing Based on Polynomial Interpolation 1 Introduction 2 Unwind Turret Rotation Position Model and Geometric Relationship Derivation 2.1 Unwind Turret Splicing Position Model 2.2 Unwind Turret Geometric Relation Derivation 3 Interpolation Algorithm Based on Polynomial 4 Application 4.1 Site Test Steps 4.2 Test Results and Analysis 5 Conclusion References Information Engineering and Artificial Intelligent Technology A Development Research of Self-guided Robot Based on Radio Frequency Identification 1 Introduction 2 Analyze Working Environment of the Paper Conveying Robot 3 Path Planning and Navigation Obstacle Avoidance 3.1 Path Planning of Paper Conveying Robot 3.2 Paper Feeding Robot Navigation 3.3 Paper Feeding Robot Obstacle Avoidance 4 Design of Robot Structure and Control System 4.1 Robot Structure Design 4.2 Robot Control System Layout 5 Software Design and Prototype Experiment 5.1 System Software Design 5.2 Prototype Experiment 6 Conclusions References Digital Twin Fault Diagnosis Method for Complex Equipment Transmission Device 1 Introduction 2 Complex Equipment Physical Monitoring Technology 3 Fault Diagnosis Technology of Complex Equipment 3.1 GA-BP Neural Network Algorithm 3.2 GA-BP Neural Network Design 3.3 GA-BP Neural Network Results Analysis 4 System Verification 4.1 System Interface 4.2 Real-Time Monitoring 5 Concluding Remarks References Modeling Method of Guide Roller Manufacturing Information Based on Ontology Modeling 1 Introduction 2 Structure and Manufacturing Process of Guide Roller 3 Ontology Model of Guide Roller Manufacturing Information 4 Evaluation of Manufacturing Information Ontology Model 5 Conclusion References Research on the Evaluation Method of Chinese Character Writing Quality Based on Machine Vision 1 Introduction 2 Introduction of the Robot Writing Platform 2.1 Robotic Writing Platform 2.2 Process of Chinese Characters Writing 3 Experimental Methods 3.1 Information Extraction of Regular Script Stroke 3.2 Information Extraction of the Actual Written Chinese Characters 3.3 Assessment of Similarity in Chinese Character 4 Experimental Results and Analysis 4.1 Analysis of Balance Similarity Results 4.2 Analysis of Inclination Similarity Results 5 Conclusion References Robot Vision Recognition System Based on Improved YOLOv3 Algorithm 1 Introduction 2 Research Status of Target Recognition 3 Construction of Experimental Platform 4 Principle of Software and Algorithm 4.1 Introduction of the YOLOv3 Algorithm 4.2 Application of Target Detection Based on Improved YOLOv3 5 Experimental Confirmation 5.1 MAP Comparison of Different Categories 5.2 Comparison of Visual Recognition Effects 5.3 Comparison of Visual Recognition Values 5.4 Comparison of Image Recognition in the Actual Situation 6 Summary References Intelligent Design of Agricultural Product Packaging Layout Based on Reinforcement Learning 1 Introduction 2 Evaluation Standard of the Layout Quality 3 Layout Generation Mode 3.1 Initial Layout 3.2 Layout Optimization 4 Experiments and Results 5 Conclusion References Design of Workshop Material Management System of Printing Enterprises Based on Modularization 1 Introduction 2 System Analysis 2.1 System Functional Analysis 2.2 Workshop Material Function Module Design 2.3 Overall Business Model 2.4 System Architecture 3 Implementation of System Functions 4 Summary References Design of Intelligent Decision Support System for Production Collaboration in Flexible Packaging Printing Enterprises 1 Introduction 2 Decision Support Model of Production Collaboration 3 Objective Function in Decision Support Model 4 An Example by Genetic Algorithm 5 Conclusion References Application Research of Self-powered Technology in Smart Packaging 1 Introduction 2 Structural Composition of Self-powered Device for Smart Packaging 3 Dynamic Modeling 4 Experiment and Result Analysis of Self-powered Device 5 Conclusions References Printing Material and Related Technology Factors Impacting Optical Properties of Mirror-Like Silver Ink Printed Paper 1 Introduction 2 Materials and Equipment 3 Results and Discussion 3.1 Effect of Ink Properties on Optical Properties of Mirror-Like Silver Ink Printed Matter 3.2 Influence of Substrate on the Optical Properties of Printed Products 3.3 Influence of Primer Coating Process on the Optical Properties of Printed Products 4 Conclusion References Research on Reproduction of Scroll Painting Based on Xuan Paper Pre-lamination Technology 1 Introduction 2 Fault Manifestation of Xuan Paper Passing Machine 2.1 Longitudinal Wrinkling 2.2 Horizontal Smudging 3 Passing Experiment of Xuan Paper Pre-laminating 3.1 Lamination Mode 3.2 Passing Experiment 4 Color Restoration Experiment 4.1 Experiment Object 4.2 Experiment Equipment 4.3 Experiment Result 5 Conclusions Reference Preparation and Properties of Food Wrapping Paper Coated on a Complex Sizing Agent of Oxidized Nanofibrillated Cellulose/Cationic Guar Gum 1 Introduction 2 Experimental 2.1 Materials and Methods 2.2 Preparation of the Complex Sizing Agent ONFC/CGG 2.3 Determination of the Performance of Water Vapor Barrier Performance and Digital Printing Performance 3 Results and Discussions 3.1 Effect of the Content of ONFC and NFC on Water Vapor Barrier Performance 3.2 Digital Printing Performances of the Coated Paper Sized by the ONFC/CGG Complex Agent 4 Conclusions References Polyacrylate Latexes with Alkali-Soluble Resin as Surfactant: Effect of Functional Monomers, Detection and Control of Residual Monomers 1 Introduction 2 Experiment 2.1 Materials 2.2 Synthesis of Polyacrylate Latexes 2.3 Preparation of Water-Based Ink 2.4 Characterization 2.5 Determination of Residual Monomer Content by Gas Chromatography 3 Results and Discussion 3.1 Influence of Functional Monomers on Latex Properties and Ink Adhesion on BOPP Films 3.2 Detection of Residual Monomer Content in Latexes 3.3 Confirmation of Isooctanol Produced During Latex Synthesis 3.4 Effect of Post-elimination on Residual Monomer Content 4 Conclusion References Preparation of PANI/GO Electrode Material Modified by Non-ionic Surfactant TX-100 1 Introduction 2 Experimental 2.1 Materials and Instruments 2.2 Experimental Content 2.3 Testing and Characterization 3 Results and Discussion 4 Conclusion References Printability Study of Electroluminescent Flexographic Inks 1 Introduction 2 Experimental Section 2.1 Experimental Materials 2.2 Experimental Equipment 2.3 Preparation of Inks 2.4 Ink Performance Test Methods 3 Results and Analysis 3.1 Influence of Solvents on the Printability of Inks and Their Determination 3.2 Effect of Resin on Ink Performance 3.3 Printability of the Developed Electroluminescent Flexographic Ink 4 Conclusion References Study on the Influences of Surfactants in the Preparation of Thermally Expandable Microcapsules 1 Introduction 2 Experiment 2.1 Materials and Instruments 2.2 Preparation 3 Results and Discussion 3.1 Surface Topography 3.2 Thermal Analysis 4 Conclusions References Preparation of Flame Retardant Phase Change Microcapsules and Ink Application 1 Introduction 2 Experiments 2.1 Materials and Instruments 2.2 Preparation of Flame Retardant Phase Change Ink 3 Results and Discussion 3.1 Morphology of Flame Retardant Phase Change Microcapsules 3.2 Thermal Properties of Flame Retardant Phase Change Microcapsules 3.3 Flame Retardant Phase Change Ink with Flame Retardant Properties 4 Conclusions References Research and Application Progress of Conductive Ink Based on Polyaniline 1 Introduction 2 Conductive Polymer Ink 3 PANI Conductive Ink 3.1 PANI 3.2 PANI Conductive Ink 4 Application of PANI Conductive Ink and Preparation 5 Conclusions and Prospects References Research Progress of Electron Beam Curing Ink 1 Development of Electron Beam Curing 2 Electron-Beam Curing Mechanism 3 Preparation of Electron Beam Ink 3.1 Electron Beam Curing Equipment 3.2 Electron Beam Curing Ink Raw Materials 3.3 Electron Beam Curing Irradiation Process 4 Electron Beam Curable Ink Applications 5 Conclusion References Film and Related Material Technology Experimental Study of Heat Storage Performance of 3D Printed Metal Foam and Phase Change Materials Composite in Packaging Applications 1 Introduction 2 Experimental Method 3 Results and Discussions 3.1 Aluminum Foam-Paraffin Heat Storage Module 3.2 Pure Paraffin Heat Storage Module 3.3 Comparison of Heat Storage Time Between Two Modules 3.4 Temperature Comparison of Two Modules 3.5 Internal Temperature Distribution of Two Modules 3.6 Temperature Comparison Between the Two Modules 4 Conclusions References Development and Application of Chiral Nematic Cellulose Nanocrystalline Iridescent Films 1 Introduction 2 CNC Iridescent Films 2.1 Adjust the Color of CNC Films 2.2 Tuning CNC Films Flexibility 2.3 Tuning the Polarization of CNC Films 3 Summary and Outlook References Preparation and Characterization of Nano-gold Titanium Oxide Composite Film for Photocatalytic Detection 1 Background 2 Experimental 3 Results and Discussion 4 Conclusions References Novel Functional Material Technology Research Progress and Prospect of Printed Batteries 1 Introduction 2 Structure of Printed Batteries 3 Recent Advances in Printed Batteries 3.1 Printed Li-Ion Batteries 3.2 Printed Zinc-Manganese Batteries 3.3 Other Types of Printed Batteries 4 Application and Development Prospects of Printed Batteries References Effect of Surfactants on Preparation of Perovskite Films 1 Introduction 2 Screening of Surfactant and Preparation of Spin Coating 2.1 Experimental Materials and Instruments 2.2 Sample Preparation 3 Result and Discussion 3.1 Effect of Surfactant Types on Ink Properties 3.2 Effect of Surfactants on Film Formation 4 Conclusion References Fully Printed Thin Film Transistors: Key Materials and Applications 1 Introduction 2 Printable Functional Materials 2.1 Metal Nanoparticle Materials 2.2 Carbon Based Materials 2.3 Organic Semiconductor Materials 3 Application of TFTs in Functional Devices 3.1 Flexible Display 3.2 Sensors 3.3 Other Functional Devices 4 Conclusion References Preparation and Properties of Self-healing Microcapsules Coatings 1 Introduction 2 Experiment 2.1 Materials 2.2 Preparation of Self-healing Microcapsules 2.3 Preparation of Coatings Containing Self-healing Microcapsules 2.4 Characterization and Measurements 3 Results and Discussion 3.1 Morphology and Structure of Self-healing Microcapsules 3.2 Self-healing Mechanism of Coatings 4 Conclusion References Preparation and Application of Reversible Thermochromic Microcapsules 1 Introduction 2 Experiments and Method 2.1 Experimental Materials 2.2 Preparation of Thermochromic Microcapsules and Ink 2.3 Thermochromic Ink Analysis and Testing 3 Results and Discussion 3.1 Thermal Properties of Thermochromic Microcapsules 3.2 Microcapsule Testing and Characterization 3.3 Thermochromic Ink Analysis and Testing 4 Conclusion References Study on Hyperelasticity of Photosensitive Resin Plate 1 Introduction 2 Research Status of Hyperelasticity Theory 3 Mooney-Rivlin Hyperelastic Constitutive Model 3.1 Strain Energy Density Function of Hyperelastic Materials 3.2 Stress-Strain Relationship of Resin Materials 4 Experimental Process and Data Analysis 5 Conclusion References Study on the Influence of the Ratio of Solvent-Free Composite A and B on the Properties of Solvent-Free Composite Products 1 Introduction 2 Effect of Solvent-Free Compound Mixing Ratio on Viscosity of Solvent-Free Compound 3 Effect of the Proportion of Solvent-Free Compound on the Curing Rate of Solvent-Free Compound 4 Effect of the Proportion of Solvent-Free Compound Material A and B on the Peel Resistance of Solvent-Free Compound Glue 4.1 Cross-Cut Test 4.2 Experimental Analysis of the Influence of the Ratio on the Peel Resistance Performance 5 Conclusion References Research Status and Progress of Biomass-Based 3D Printing Materials 1 Introduction 2 Application of Biomass Materials in 3D Printing 2.1 Wood materials 2.2 Other Biomass Materials 3 3D Printing Process Classification 3.1 Fused Deposition Modeling 3.2 Direct Ink Writing 3.3 Selective Laser Sintering 4 Characterization Methods of 3D Printed Products 4.1 Mechanical Properties 4.2 Stability 4.3 Morphological Representation 4.4 Degradation Performance 5 Conclusions References Preparation of the Lignin-Based Carbon Fibers Reinforced Composite 1 Introduction 2 Experimental 2.1 Materials 2.2 Preparation of Lignin-Based Carbon Fibers Reinforced Composite 2.3 Characterization 3 Results and Discussion 3.1 Effect of Nano-dispersed Reinforcing Phase on Mechanical Properties of Reinforced Composite 3.2 Enhancement Mechanism Analysis 4 Conclusions References Research Progress of Electromagnetic Shielding Performance of MXene (Ti3C2Tx) Composites 1 Introduction 2 Properties and Preparation of MXene 2.1 Hydrofluoric Acid (HF) Etching Method 2.2 Lithium Fluoride (Li) and Hydrochloric Acid (HCl) Etching Method 2.3 Ammonium Hydrogen Fluoride (NH4HF2) Etching Method 2.4 Polar Organic Solvent Anhydrous Etching Method 2.5 Molten Fluoride Salt Etching Method 2.6 Alkali-Assisted Hydrothermal Etching Method 2.7 Solution Phase Flocculation Etching Method 3 Electromagnetic Shielding Mechanism 3.1 Reflection Loss (SER) 3.2 Absorption Loss (SEA) 3.3 Multiple Reflections (SEM) 4 Typical Structures of MXene/Composites in the Field of Electromagnetic Shielding 4.1 MXene Composite Membranes 4.2 MXene-Based Porous Foam 4.3 MXene-Based Composite Aerogel 5 Summary and Prospect References Numerical Simulation of Femtosecond Laser Ablation of 304 Stainless Steel 1 Introduction 2 Ablative Model of Single-Pulse 2.1 Numerical Simulation of Femtosecond Laser 2.2 Ablation Threshold for Materials at a Single-Pulse 2.3 Variation of Ablative Areas Under Different Energy Densities 3 Ablative Model of Multi-pulse 3.1 Energy Accumulative Effect of Multi-pulse 3.2 Laser Overlap Rate 4 Conclusion References Simulation Analysis of Temperature Field of Ni60 Nickel-Based Alloy Femtosecond Laser Cladding High-Speed Steel Substrate 1 Introduction 2 Cladding Material and Simulation Pretreatment Stage 2.1 Laser-Powder Interaction 2.2 Establishment of the Model 3 Analysis of Temperature Field Results 3.1 Law of Temperature Field Changing with Location 3.2 Process Parameters - Temperature Field Results Influence 4 Conclusion References Author Index