Advanced Engineering Optimization Through Intelligent Techniques: Select Proceedings of AEOTIT 2018

Description

This book comprises select peer-reviewed papers presented at the International Conference on Advanced Engineering Optimization Through Intelligent Techniques (AEOTIT) 2018. The book combines contributions from academics and industry professionals, and covers advanced optimization techniques across all major engineering disciplines like mechanical, manufacturing, civil, automobile, electrical, chemical, computer and electronics engineering. Different optimization techniques and algorithms such as genetic algorithm (GA), differential evolution (DE), simulated annealing (SA), particle swarm optimization (PSO), artificial bee colony (ABC) algorithm, artificial immune algorithm (AIA), teaching-learning-based optimization (TLBO) algorithm and many other latest meta-heuristic techniques and their applications are discussed. This book will serve as a valuable reference for students, researchers and practitioners and help them in solving a wide range of optimization problems. Front Matter ....Pages i-xviii Combined Intelligent and Adaptive Optimization in End Milling of Multi-layered 16MnCr5/316L (Uros Zuperl, Franc Cus)....Pages 1-11 Jaya: A New Meta-heuristic Algorithm for the Optimization of Braced Dome Structures (Tayfun Dede, Maksym Grzywiński, R. Venkata Rao)....Pages 13-20 Damage Detection of Truss Employing Swarm-Based Optimization Techniques: A Comparison (Swarup K. Barman, Dipak K. Maiti, Damodar Maity)....Pages 21-37 Multi-objective Optimization of Wire-Electric Discharge Machining Process Using Multi-objective Artificial Bee Colony Algorithm (P. J. Pawar, M. Y. Khalkar)....Pages 39-46 Optimization of Process Parameters in Pulsed Electrochemical Honing Process Using Evolutionary Algorithms (Sunny Diyaley, Shankar Chakraborty)....Pages 47-57 Modeling and Simulation of Huge AC Power Network for Optimization of Corona Power Loss Through TLBO Algorithm (Manan Pathak, Ishita Bhatt)....Pages 59-65 Optimization of Water Distribution Networks Using Cuckoo Search Algorithm (Maduukuri Naveen Naidu, Pankaj Sriman Boindala, A. Vasan, Murari R. R. Varma)....Pages 67-74 GA-Based Hybrid Approach to Solve Fuzzy Multi-objective Optimization Model of Multi-application-Based COTS Selection Problem (Anita Ravi Tailor, Jayesh M. Dhodiya)....Pages 75-86 Optimization of Parameters for Steel Recycling Process by Using Particle Swarm Optimization Algorithm (S. Allurkar Baswaraj, M. Sreenivasa Rao)....Pages 87-93 Modeling 3D WSN to Maximize Coverage Using Harmony Search Scheme (Deepika Sharma, Vrinda Gupta)....Pages 95-111 An Efficient Jaya Algorithm for Multi-objective Permutation Flow Shop Scheduling Problem (Aseem Kumar Mishra, Divya Shrivastava, Bhasker Bundela, Surabhi Sircar)....Pages 113-125 Multi-objective Optimization of EDM Process Parameters Using Jaya Algorithm Combined with Grey Relational Analysis (Ashish Khachane, Vijaykumar Jatti)....Pages 127-135 Application of Fuzzy Integrated JAYA Algorithm for the Optimization of Surface Roughness of DMLS Made Specimen: Comparison with GA (Hiren Gajera, Veera Darji, Komal Dave)....Pages 137-152 Comparative Analysis of Fruit Categorization Using Different Classifiers (Chirag C. Patel, Vimal K. Chaudhari)....Pages 153-164 Design Optimization of Plate-Fin Heat Exchanger by Using Modified Jaya Algorithm (Kiran Chunilal More, R. Venkata Rao)....Pages 165-172 Prediction of Factor of Safety For Slope Stability Using Advanced Artificial Intelligence Techniques (Abhiram Chebrolu, Suvendu Kumar Sasmal, Rabi Narayan Behera, Sarat Kumar Das)....Pages 173-181 The Use of Grey Relational Analysis to Determine Optimum Parameters for Plasma Arc Cutting of SS-316L (K. S. Patel, A. B. Pandey)....Pages 183-192 Jaya Algorithm Based Intelligent Color Reduction (Raghu Vamshi Hemadri, Ravi Kumar Jatoth)....Pages 193-201 Tooth Profile Optimization of Helical Gear with Balanced Specific Sliding Using TLBO Algorithm (Paridhi Rai, Asim Gopal Barman)....Pages 203-210 Optimization of Nanofluid Minimum Quantity Lubrication (NanoMQL) Technique for Grinding Performance Using Jaya Algorithm (R. R. Chakule, S. S. Chaudhari, P. S. Talmale)....Pages 211-221 Performance Evaluation of Jaya Optimization Technique for the Production Planning in a Dairy Industry (Aparna Chaparala, Radhika Sajja, K. Karteeka Pavan, Sreelatha Moturi)....Pages 223-230 Multi-objective Optimization in WEDM of Inconel 750 Alloy: Application of TOPSIS Embedded Grey Wolf Optimizer (G. Venkata Ajay Kumar, K. L. Narasimhamu)....Pages 231-240 Experimental Investigations and Selection of Solid Lubricant Assisted Lubrication Strategy in Machining with the Use of PROMETHEE (M. A. Makhesana, K. M. Patel)....Pages 241-251 BPSO-Based Feature Selection for Precise Class Labeling of Diabetic Retinopathy Images (Rahul Kumar Chaurasiya, Mohd Imroze Khan, Deeksha Karanjgaokar, B. Krishna Prasanna)....Pages 253-264 Dynamic Analysis and Life Estimation of the Artificial Hip Joint Prosthesis (Akbar Basha Shaik, Debasish Sarkar)....Pages 265-274 Modeling Elastic Constants of Keratin-Based Hair Fiber Composite Using Response Surface Method and Optimization Using Grey Taguchi Method (P. Divakara Rao, C. Udaya Kiran, K. Eshwara Prasad)....Pages 275-289 A Decennary Survey on Artificial Intelligence Methods for Image Segmentation (B. Vinoth Kumar, S. Sabareeswaran, G. Madumitha)....Pages 291-311 Air Quality Assessment Using Fuzzy Inference Systems (Seema A. Nihalani, Nandini Moondra, A. K. Khambete, R. A. Christian, N. D. Jariwala)....Pages 313-322 Optimization of Water Releases from Ukai Reservoir Using Jaya Algorithm (Vijendra Kumar, S. M. Yadav)....Pages 323-336 Design of Antenna Arrays Using Chaotic Jaya Algorithm (R. Jaya Lakshmi, T. Mary Neebha)....Pages 337-349 Optimization of Friction Drilling Process by Response Surface Methodology (Akshay Potdar, Sagar Sapkal)....Pages 351-359 Optimization of Parameters in Friction Stir Welding of AA6101-T6 by Taguchi Approach (Deepak Kumar, Jatinder Kumar)....Pages 361-370 Evolutionary Optimization in Master Production Scheduling: A Case Study (Radhika Sajja, K. Karteeka Pavan, Ch. Srinivasa Rao, Swapna Dhulipalla)....Pages 371-379 Optimal Irrigation Planning in the Eastern Gandak Project Using Linear Programming—A Case Study (M. Bhushan, L. B. Roy)....Pages 381-391 Optimization of Squeeze Casting Process Parameters to Investigate the Mechanical Properties of AA6061/Al2O3/SiC Hybrid Metal Matrix Composites by Taguchi and Anova Approach (L. Natrayan, M. Senthil Kumar, Mukesh Chaudhari)....Pages 393-406 Parametric Optimization of Electrochemical Machining Process Using Taguchi Method and Super Ranking Concept While Machining on Inconel 825 (Partha Protim Das, Shankar Chakraborty)....Pages 407-415 Dependency of Bead Geometry Formation During Weld Deposition of 316 Stainless Steel Over Constructional Steel Plate (M. K. Saha, S. Sadhu, P. Ghosh, A. Mondal, R. Hazra, S. Das)....Pages 417-429 Performance Assessment of Inter-Digital Capacitive Structure-Finite Element Approach (Sheeja P. George, Johney Isaac, Jacob Philip)....Pages 431-439 MADM-Based Approach for Selection of Welding Process for Aluminum Tube Manufacturing (Ravindra Singh Saluja, Varinder Singh)....Pages 441-450 Screening of Organic Brake Pad Materials Using MADM Technique (K. N. Hendre, B. D. Bachchhav)....Pages 451-461 Selection of Coating and Nitriding Process for AISI 4140 Steel Material to Enhance Tribological Properties (Pathan Firojkhan, Nikhil Kadam, S. G. Dambhare)....Pages 463-473 Risk-Pooling Approach in Inventory Control Model for Multi-products in a Distribution Network Under Uncertainty (Vats Peeyush, Soni Gunjan, A. P. S. Rathore)....Pages 475-487 Optimization of Magnetic Abrasive Finishing Process Using Principal Component Analysis (S. B. Gunjal, P. J. Pawar)....Pages 489-496 Dynamic Distribution Network Expansion Planning Under Energy Storage Integration Using PSO with Controlled Particle Movement (Santosh Kumari, Prerna Jain, Dipti Saxena, Rohit Bhakar)....Pages 497-514 Development of Plant Layout for Improving Organizational Effectiveness by Hybridizing GT, TOPSIS and SLP (Biswanath Chakraborty, Santanu Das)....Pages 515-525 Optimization of Process Parameters Using Hybrid Taguchi and VIKOR Method in Electrical Discharge Machining Process (B. Singaravel, S. Deva Prasad, K. Chandra Shekar, K. Mangapathi Rao, G. Gowtham Reddy)....Pages 527-536 Multi-response Optimization of Burnishing of Friction-Welded AA6082-T6 Using Principal Component Analysis (R. S. Tajane, P. J. Pawar)....Pages 537-551 Design Optimization of Helicopter Rotor with Trailing-Edge Flaps Using Genetic Algorithm (Saijal Kizhakke Kodakkattu)....Pages 553-562 Statistical Model for Spot Welding of Aluminum Alloy 6082T651 Using an Interlayer (Arick. M. Lakhani, P. H. Darji)....Pages 563-574 Fuzzy Programming Technique for Solving Uncertain Multi-objective, Multi-item Solid Transportation Problem with Linear Membership Function (Vandana Y. Kakran, Jayesh M. Dhodiya)....Pages 575-588 Investigation of Influence of Process Parameters in Deep Drawing of Square Cup (Chandra Pal Singh, Prachi Kanherkar, Lokesh Bajpai, Geeta Agnihotri)....Pages 589-598 Selection of Machining Parameters in Ultrasonic Machining Process Using CART Algorithm (Shruti Dandge, Shankar Chakraborty)....Pages 599-607 PSF-Based Spectrum Occupancy Prediction in Cognitive Radio (Jayesh Patil, Neeraj Bokde, Sudhir Kumar Mishra, Kishore Kulat)....Pages 609-619 Hertzian Contact Stress Analysis in Roller Power Transmission One-Way Clutch by Using Finite Element Analysis (Karan A. Dutt, S. B. Soni, D. V. Patel)....Pages 621-630 Numerical Simulation and Experimental Study on Lightweight Mechanical Member (G. Lakshmi Srinivas, Arshad Javed)....Pages 631-641 Robust Analysis of T-S Fuzzy Controller for Nonlinear System Using H-Infinity (Manivasagam Rajendran, P. Parthasarathy, R. Anbumozhi)....Pages 643-651 Adsorption of Crystal Violet Dye: Parameter Optimization Using Taguchi’s Experimental Methodology (T. B. Gupta, D. H. Lataye, S. T. Kurwadkar)....Pages 653-665 Minimization of Springback in Seamless Tube Cold Drawing Process Using Advanced Optimization Algorithms (D. B. Karanjule, S. S. Bhamare, T. H. Rao)....Pages 667-677 Integrated Production Planning and Scheduling for Parallel Production Lines (K. C. Bhosale, P. J. Pawar)....Pages 679-687 Optimization of Surface Modification Phenomenon for P20+Ni Die Steel Using EDM with P/M Composite Electrode (Jayantigar Lakhmangar Ramdatti, Ashishkumar Vitthaldas Gohil)....Pages 689-697 Optimization of Tool Wear and Surface Roughness of Hybrid Ceramic Tools (G. Amith Kumar, T. Jagadeesha)....Pages 699-705 Assessment of Viscosity of Coconut-Oil-Based CeO2/CuO Hybrid Nano-lubricant Using Artificial Neural Network (Ayamannil Sajeeb, Perikinalil Krishnan Rajendrakumar)....Pages 707-715 Elimination of Nick Defect by Process Optimization for Input Shaft Reverse Gear Section (Sagar U. Sapkal, Tejas A. Bhilawade)....Pages 717-725 Experimental Investigation of Cutting Parameters on Surface Roughness in Hard Turning of AISI 4340 Alloy Steel (Vaishal J. Banker, Jitendra M. Mistry, Mihir H. Patel)....Pages 727-737 Experimental Study of Process Parameters on Finishing of AISI D3 Steel Using Magnetorheological Fluid (V. S. Kanthale, D. W. Pande)....Pages 739-748 Evaluation of Aeration Efficiency of Triangular Weirs by Using Gaussian Process and M5P Approaches (Akash Jaiswal, Arun Goel)....Pages 749-756 Performance Evaluation of Kaplan Turbine with Different Runner Solidity Using CFD ( Brijkishore, Ruchi Khare, Vishnu Prasad)....Pages 757-767 Prediction of Occupational Risk at Workplace Using Artificial Neural Network—A Case Study (Dharmendra V. Jariwala, R. A. Christian)....Pages 769-776 Quantification of Influence of Casting Variables for Minimizing Hot Spot Area in T Junction by ANOVA and Taguchi Method (Prachi Kanherkar, Chandra Pal Singh, Sanjay Katarey)....Pages 777-786 Taguchi-Based Optimization of Machining Parameter in Drilling Spheroidal Graphite Using Combined TOPSIS and AHP Method (Pruthviraj Chavan, Ajinkya Patil)....Pages 787-797 Optimal Configuration of Viscous Dampers Connected to Adjacent Similar Buildings Using Particle Swarm Optimization (Uppari Ramakrishna, S. C. Mohan, K. Sai Pavan Kumar)....Pages 799-807 Combined Economic Emission Dispatch Using Spider Monkey Optimization (Anand Singh Tomar, Hari Mohan Dubey, Manjaree Pandit)....Pages 809-818 Solution of Non-convex Economic Dispatch Problems by Water Cycle Optimization (Vishal Chaudhary, Hari Mohan Dubey, Manjaree Pandit)....Pages 819-829 Multi-objective Design Optimization of Shell-and-Tube Heat Exchanger Using Multi-objective SAMP-Jaya Algorithm (R. Venkata Rao, Ankit Saroj, Jan Taler, Pawel Oclon)....Pages 831-838 An Improved Jaya Algorithm and Its Scope for Optimization in Communications Engineering (Ravipudi Jaya Lakshmi)....Pages 839-846 Performance Evaluation of TiN-Coated CBN Tools During Turning of Variable Hardened AISI 4340 Steel (Sanjeev Kumar, Dilbag Singh, Nirmal S. Kalsi)....Pages 847-857 Back Matter ....Pages 859-861