Recent Advances in Manufacturing Engineering and Processes: Proceedings of ICMEP 2022

Description

This book comprises state-of-the-art papers in manufacturing engineering & processes including computer-aided design and manufacturing, environmentally sustainable manufacturing processes, modelling, analysis, and simulation of manufacturing processes, composite materials manufacturing, nanomaterials and nano-manufacturing, semiconductor materials manufacturing, rapid manufacturing technologies, 3D printing and non-traditional manufacturing engineering and processes. In particular, the papers in the book cover latest advances especially in 3D printing and additive manufacturing techniques and processes for sustainable materials including ceramic and polymer-matrix composite where there is paucity of good papers in the literature. The contents of this volume will be useful to researchers and practicing engineers alike.  Organization Preface Contents Electromechanical System and Engineering Design Finite Element Analysis of Ankle Foot Design Based on Indonesian Anthropometry 1 Introduction 2 Material and Methods 2.1 Biomechanical Design 2.2 Simulation 3 Results and Discussion 3.1 Stress Analysis Von Misses Stress 3.2 Static Analysis Displacement 3.3 Static Analysis Strain 4 Conclusion References Automated Disinfection System for Polyethylene Terephthalate Bottles for Bacteria, Fungi, and Viruses Using UVC LED Camera 1 Introduction 2 Methodology 3 Materials 4 Results 4.1 Disinfection Process Time 4.2 Conveyor Belt 4.3 Electronic Circuit and Programmable Logic Control Diagram 4.4 Ladder Programming Blocks 4.5 Automated PET Bottle Machine 5 Discussion 6 Conclusion References Design of the CNC Router Structure for Machining Wood Materials Using Reliability-Based Design Optimization Method 1 Introduction 2 Theoretical Background 3 Numerical Example 4 Conclusions References Development of Intelligent Drone for Cassava Farming 1 Introduction 2 Developed Drone Structure 3 Cassava Abnormality Detection 3.1 Data Set Preparation 3.2 Image Identification and Amount of Data 3.3 Creating AI to Detect Cassava (Object Detection) 4 Conclusion References Calculation and Optimization of the Two Stage Worm-Gear Reducers Speed Ratio 1 Introduction 2 Fundamental of Gear and Worm Drives Calculations 2.1 Speed Ratio Distribution in Two Stage Worm-Spur Gear Reducer 2.2 Speed Ratio Distribution in Two Stage Worm-Bevel Gear Reducer 3 Calculation Results and Applications 3.1 Speed Ratio Distribution in Two Stage Worm-Spur Gear Reducer 3.2 Speed Ratio Distribution in Two Stage Worm-Bevel Gear Reducer 4 Conclusion References Project-Based Learning in Product Design Engineering: A Case Study of External Gear Pump Design 1 Introduction 2 Methodology 2.1 Design Problem Formulation 3 Results and Discussion 3.1 Gear Parametric Design 3.2 Final Concept Design 3.3 Failure Mode Analysis 4 Conclusions References Machining and Manufacturing Tool Wear Analysis on Time-Domain and Frequency-Domain Data of Machining S45C Using Signal Processing Technique 1 Introduction 2 Methodology 3 Result and Discussion 4 Conclusion References Optimization of the Weight and Size Characteristics of the Power Bracket for Additive Manufacturing Based on Topological Optimization Algorithms 1 Introduction 2 Materials and Methods 3 Results and Discussion 4 Conclusion References Identification and Active Control of the Chatter Phenomenon in the Milling Process Using a Pneumatic Actuator 1 Introduction 2 Materials and Methods 2.1 Experimental Modal Analysis 2.2 Equipment 3 Results and Discussion 3.1 The Results of the Experiments on the Inconel 617 Super Alloy 4 Conclusions References SHS Extrusion of a Composite Material Based on Aluminum-Magnesium Spinel 1 Introduction 2 Materials and Methods 3 Results and Discussion 4 Summary References Fluid Mechanical Engineering and Engineering Thermodynamics Visual Observation of the Vortex Flow from the Same Diameter Circular Cylinders Which Sandwiched a Partition Disk 1 Introduction 2 Experimental Apparatus and Method 2.1 Outline of Experimental Apparatus 2.2 Experimental Procedure 2.3 Experimental Parameters 3 Experimental Results and Discussion 4 Conclusions References Experimental Study of the Porous Emitter Installed in a Gas Porous Burner 1 Introduction 2 Experimental Apparatus 3 Results and Discussion 3.1 Influence of Thickness of Porous Emitter (HPE) 3.2 Influence of Volumetric Premixed-Gas Flow Rate (Vmix) 4 Conclusion References Experimental and Numerical Investigations of Effects of Wall Friction and Vibrational Amplitude on Convection Phenomena in Granular Materials Under Vertical Vibrations 1 Introductions 2 Methodology 2.1 Experimental Setup 2.2 Numerical Setup 2.3 Dimensionless Angular Velocity (W) 3 Results 3.1 Effect of the Wall Friction 3.2 Effect of the Vibrational Amplitude 4 Conclusion References Comparative Study of Radiative Flux from Mushroom BLEVE Model 1 Introduction 2 Methods 3 Discussion of Results 3.1 The Real Fireball Geometry: “Mushroom Shape” 3.2 Modeling of the Mushroom Shape Approach 3.3 Determination of the Volume’s Characteristics Forming the Mushroom and of the Volume Ratio Α 3.4 Radiative Flux Measurement 3.5 Graphic Comparison Between the Two Models 3.6 Discussion 4 Conclusion References Applied Mechanics and Engineering Mechanics Belt Layer Effects on Non-pneumatic Tire Performance by Finite Element Analysis 1 Introduction 2 Finite Element Method 2.1 Finite Element Model 2.2 Finite Element Analysis 3 Results and Discussion 3.1 Effects on the Vertical Stiffness 3.2 Effects on the Safety Factor 3.3 Effects on the Contact Area 3.4 Effects on the Contact Pressure 4 Conclusions References Analysis of Hybrid Viscoelastic Sheets Adhered to the Hull of a GFRP Vessel to Reduce Impact Damage 1 Introduction 2 Viscoelastic Layers as Energy Dissipators in the Construction of GFRP Laminates 3 Experimental Observation of the Protection of the Superimposed Viscoelastic Layer 4 Conclusions References On the Contact Between Viscoelastic Tube with Inner Nonuniform Coating and Several Rigid Inserts 1 Introduction 2 Mathematical Model of the Problem 3 Mathematical Model in Dimensionless Form 4 Solution of the Problem 5 Conclusions References Failure Modes of Skull Bone of a Dog Head Under Impact Loading 1 Introduction 2 Dog Head Structure and Testing Method 2.1 Overview of Dog Head Anatomy 2.2 Impact Test Apparatus 3 Results 3.1 Discussion 4 Conclusion References Seismic Retrofit of RC Building with Elastic Stage of Buckling-Restrain Braces 1 Introduction 2 Seismic Evaluation for Existing RC Building 3 Results of Seismic Evaluation for Existing RC Building 4 Retrofit Existing RC Building with Buckling-Restrained Braces 5 Results of Seismic Retrofit of RC Building with Buckling-Restrained Braces 6 Conclusion References Response and Damage Identification by Long-Gauge Strain Sensor of Beam-Like Bridges Under the Loads of Vehicle: A Comparison of the Analytical Model and in Situ Measurement 1 Introduction 2 Formulation of the Problem 3 Natural Frequencies and Mode Shapes 3.1 Configuration of the Beam 3.2 The Intermediate Supports 3.3 The Interface Between Intact and Damaged Beam Segments 3.4 Damage Identification Using Distributed Long-Gauge Strain Sensors Method 3.5 Results 4 Application to Bridge Structures 5 Conclusion References Metallic Materials and Corrosion Protection Relation Between Binging Energy, Isothermal Bulk Modulus, and Surface Tension of Liquid Metals 1 Introduction 2 Initial Data 3 Results and Discussion 4 Conclusion References Corrosion Protection Method with Sacrificial Anode for Steel Members in Boundary with Ground Using Water Swelling Rubber 1 Introduction 2 Experiment 2.1 CP System 2.2 Water Absorption and Retention Test 2.3 Electrochemical Test 3 Results and Discussion 3.1 Water Absorption and Retention Properties of the Rubber 3.2 Electrochemical Test Result 4 Conclusion References