University Chemistry

Description

Title Contents 0 The Language of Chemistry 0.1 Chemistry Is the Study of Matter and Change 0.2 Matter Consists of Atoms and Molecules 0.3 Compounds Are Represented by Chemical Formulas 0.4 Reactions Are Represented by Balanced Chemical Equations 0.5 Quantities of Atoms or Molecules Can Be Described by Mass or Number 0.6 Stoichiometry Is the Quantitative Study of Mass and Mole Relationships in Chemical Reactions 1 The Quantum Theory of the Submicroscopic World 1.1 Classical Physics Does Not Adequately Describe the Interaction of Light with Matter 1.2 The Bohr Model Was an Early Attempt to Formulate a Quantum Theory of Matter 1.3 Matter Has Wavelike Properties 1.4 The Hydrogen Atom Is an Exactly Solvable Quantum-Mechanical System 2 Many-Electron Atoms and the Periodic Table 2.1 The Wavefunctions of Many-Electron Atoms Can Be Described to a Good Approximation Using Atomic Orbitals 2.2 Electron Configurations of Many-Electron Atoms Are Constructed Using the Aufbau (or “Building-up”) Principle 2.3 The Periodic Table Predates Quantum Mechanics 2.4 Elements Can Be Classified by Their Position in the Periodic Table 2.5 The Properties of the Elements Vary Periodically Across the Periodic Table 3 The Chemical Bond 3.1 Atoms in a Molecule Are Held Together by Chemical Bonds 3.2 A Covalent Bond Involves the Sharing of Electrons Between Atoms in a Molecule 3.3 Electronegativity Differences Determine the Polarity of Chemical Bonds 3.4 Drawing Correct Lewis Structures Is an Invaluable Skill for a Chemist 3.5 Molecular Orbital Theory Provides a Detailed Description of Chemical Bonding 4 Molecular Structure and Interaction 4.1 The Basic Three-Dimensional Structure of a Molecule Can Be Predicted Using the VSEPR Model 4.2 The Polarity of a Molecule Can Be Described Quantitatively by Its Dipole Moment 4.3 Valence Bond Theory for Polyatomic Molecules Requires the Use of Hybrid Orbitals 4.4 Isomers Are Compounds That Have the Same Molecular Formula but Different Atomic Arrangements 4.5 Bonding in Polyatomic Molecules Can Be Explained Using Molecular Orbitals 4.6 The Interactions Between Molecules Greatly Affect the Bulk Properties of Materials 5 The States of Matter I: Phase Diagrams and Gases 5.1 Pressure and Temperature Are Two Important Macroscopic Properties of Chemical Systems 5.2 Substances and Mixtures Can Exist as Solid, Liquid, or Gas, Depending upon the External Conditions 5.3 The Ideal-Gas Equation Describes the Behavior of All Gases in the Limit of Low Pressure 5.4 The Kinetic Theory of Gases Provides a Molecular Explanation for the Behavior of Gases 5.5 Real Gases Exhibit Deviations from Ideal Behavior at High Pressures 6 The States of Matter II: Liquids and Solids 6.1 The Structure and Properties of Liquids Are Governed by Intermolecular Interactions 6.2 Crystalline Solids Can Be Classified in Terms of Their Structure and Intermolecular Interactions 6.3 The Properties of Crystalline Solids Are Determined Largely by Intermolecular Interactions 6.4 Band Theory Accurately Explains the Conductivity of Metals, Semiconductors, and Insulators ix 7 Thermochemistry: Energy in Chemical Reactions 7.1 Thermodynamics Is the Study of Energy and Its Transformations in Macroscopic Systems 7.2 The Energy Absorbed by a System as Heat in a Constant-Pressure Process Is Equal to the Change in Enthalpy 7.3 The Temperature Change of a System upon Heating Is Governed by Its Heat Capacity 7.4 The Enthalpy Changes for any Reaction Can Be Calculated Using Standard Enthalpies of Formation 7.5 The Reaction Enthalpies Can Be Estimated from Bond Enthalpies 7.6 Enthalpy Changes Also Accompany Physical Transformations 7.7 The Temperature Dependence of Reaction Enthalpies Can Be Determined from Heat Capacity Data 8 Entropy, Free Energy, and the Second Law of Thermodynamics 8.1 The Entropy of an Isolated System Always Increases in Any Spontaneous Process 8.2 The Entropy Change for a Process Can Be Calculated Using the Thermodynamic Definition of Entropy 8.3 The Third Law of Thermodynamics Allows Us to Determine Absolute Entropies 8.4 The Spontaneity of a Process at Constant Temperature and Pressure Is Governed by the Gibbs Free Energy 8.5 The Mixing of Pure Substances Leads to an Increase in the Entropy and a Decrease in the Gibbs Free Energy 8.6 In Living Systems, Spontaneous Reactions Are Used to Drive Other Nonspontaneous, but Essential, Biochemical Processes 9 Physical Equilibrium 9.1 The Phase Boundaries in Pure Substances Can Be Predicted Using Thermodynamics 9.2 The Solubility of a Substance Is Determined by Temperature, Pressure, and Intermolecular Forces 9.3 The Liquid-Vapor Phase Equilibrium of a Solution Can Be Understood in Terms of the Entropy of Mixing and the Intermolecular Forces 9.4 Colligative Properties Are Properties of Solution Phase Equilibria That Depend Only upon the Number of Solute Molecules, Not Their Type 10 Chemical Equilibrium 10.1 The Equilibrium Constant Governs the Concentration of Reactants and Products at Equilibrium 10.2 The Equilibrium Constant Can Be Used to Predict the Direction and Equilibrium Concentrations of a Chemical Reaction 10.3 The Equilibrium Constant for a Reaction Can Be Determined from the Standard Gibbs Energy Change 10.4 The Response of an Equilibrium System to a Change in Conditions Can Be Determined Using Le Châtelier’s Principle 11 Acids and Bases 11.1 Many Processes in Chemistry Are Acid-Base Reactions 11.2 The Acid-Base Properties of Aqueous Solutions Are Governed by the Autoionization Equilibrium of Water 11.3 The Strengths of Acids and Bases Are Measured by Their Ionization Constants 11.4 The pH of an Acid or Base Can Be Calculated If Its Ionization Constant Is Known 11.5 The Strength of an Acid Is Determined in Part by Molecular Structure 11.6 Many Salts Have Acid-Base Properties in Aqueous Solution 11.7 Oxide and Hydroxide Compounds Can Be Acidic or Basic in Aqueous Solution Depending on Their Composition 12 Acid-Base Equilibria and Solubility 12.1 Ionization of Weak Acids and Bases Is Suppressed by the Addition of a Common Ion 12.2 The pH of a Buffer Solution Is Resistant to Large Changes in pH 12.3 The Concentration of an Unknown Acid or Base Can Be Determined by Titration 12.4 An Acid-Base Indicator Is a Substance That Changes Color at a Specific pH 12.5 A Precipitation Reaction Occurs when a Reaction in Solution Leads to an Insoluble Product 12.6 The Solubility Product Is the Equilibrium Constant for the Dissolution Process 12.7 The Solubility of a Substance Is Affected by a Number of Factors 12.8 The Solubility Product Principle Can Be Applied to Qualitative Analysis 13 Electrochemistry 13.1 Oxidation-Reduction (Redox) Reactions Involve a Transfer of Electrons from One Species to Another 13.2 Redox Reactions Can Be Used to Generate Electric Current in a Galvanic Cell 13.3 The Standard Emf of Any Electrochemical Cell Can Be Determined If the Standard Reduction Potentials for the Half-Reactions Are Known 13.4 The Emf of an Electrochemical Cell Is Directly Related to the Gibbs Free-Energy Change of the Redox Reaction 13.5 The Concentration Dependence of the Emf Can Be Determined Using the Nernst Equation 13.6 Batteries Use Electrochemical Reactions to Produce a Ready Supply of Electric Current 13.7 In Electrolysis, an Electric Current Is Used to Drive a Nonspontaneous Reaction xi 14 Chemical Kinetics 14.1 Chemical Kinetics Is the Study of the Rates at Which Chemical Reactions Occur 14.2 The Rate Law Gives the Dependence of the Reaction Rate on the Reactant Concentration 14.3 Integrated Rate Laws Specify the Relationship Between Reactant Concentration and Time 14.4 The Arrhenius Equation Gives the Temperature Dependence of Rate Constants 14.5 The Reaction Mechanism Is the Sequence of Elementary Steps That Lead to Product Formation 14.6 Reaction Rates Can Often Be Increased by the Addition of a Catalyst 15 The Chemistry of Transition Metals 15.1 Transition Metals Have Electron Configurations with Incomplete d or f Shells 15.2 Transition Metals Can Form a Variety of Coordination Compounds 15.3 Bonding in Coordination Compounds Can Be Described by Crystal Field Theory 15.4 The Reactions of Coordination Compounds Have a Wide Number of Useful Applications 16 Organic and Polymer Chemistry 16.1 Hydrocarbons Are Organic Compounds Containing Only Hydrogen and Carbon 16.2 Hydrocarbons Undergo a Number of Important Chemical Reactions 16.3 The Structure and Properties of Organic Compounds Are Greatly Influenced by the Presence of Functional Groups 16.4 Polymers Are Large Molecular Weight Compounds Formed from the Joining Together of Many Subunits Called Monomers 16.5 Proteins Are Polymer Chains Composed of Amino Acid Monomers 16.6 DNA and RNA Are Polymers Composed of Nucleic Acids 17 Nuclear Chemistry 17.1 Nuclear Chemistry Is the Study of Changes Involving Atomic Nuclei 17.2 The Stability of a Nucleus Is Determined Primarily by Its Neutron-to-Proton Ratio 17.3 Radioactive Decay Is a First-Order Kinetic Process 17.4 New Isotopes Can Be Produced Through the Process of Nuclear Transmutation 17.5 In Nuclear Fission, a Large Nucleus Is Split into Smaller Nuclei 17.6 In Nuclear Fusion, Energy Is Produced When Light Nuclei Combine to Form Heavier Ones 17.7 Radioactive and Stable Isotopes Alike Have Many Applications in Science and Medicine 17.8 The Biological Effects of Radiation Can Be Quite Dramatic Appendix 1 Measurement and Mathematical Background A1.1 Measurement A1.2 Mathematical Background Appendix 2 Thermodynamic Data at 1 Bar and 25 C Appendix 3 Derivation of the Names of the Elements Appendix 4 Isotopes of the First Ten Elements Glossary Answers to Even-Numbered Problems Credits Index