Recent Trends in Industrial and Production Engineering: Select Proceedings of ICAST 2020

Description

This book presents the select proceedings of the International Conference on Advances in Sustainable Technologies (ICAST 2020), organized by Lovely Professional University, Punjab, India. This book caters to the industrial and production engineering aspects. It covers the industrial and production engineering areas such as sustainable manufacturing systems, decision sciences, supply chain management, Just in Time (JIT), logistics and supply chain management, rapid prototyping and reverse engineering, quality control and reliability, six sigma, smart manufacturing, time and motion study, six sigma, ergonomics, operations management, manufacturing management, metrology, manufacturing process optimization, machining and machine tools, casting, welding, and forming. This book will be useful for industry professionals and researchers working in the area of mechanical engineering, especially industrial and production engineering. Preface Acknowledgements Contents About the Editors A Comparative Analysis of Different Techniques of Thermal Barrier Coating 1 Introduction 2 Various Techniques of Coating 2.1 Atmospheric Plasma Spraying Technique (APS) 2.2 Electron Beam-Physical Vapor Deposition (EB-PVD) 2.3 High Velocity Oxygen Fuel (HVOF) 2.4 Kinetic Spray Coatings 2.5 Comparison Between the Techniques of Coating 3 Conclusion References A Review on Post Additive Manufacturing Techniques to Improve Product Quality 1 Introduction 2 Temperature Effect on 3D-Printed Parts 3 Reason of Porosity and Affective Measures 4 Surface Roughness Affects and Measures 5 Warping 6 Quality Methods 7 Crack Detection in 3D-Printing Process 8 Material Selection 9 Conclusion References A Review on Various Types of Burr Formation in Drilling 1 Introduction 2 Results and Discussions 3 Conclusions References Application of 5s Methodology in a Small-Scale Enterprise: Case Study 1 Introduction 2 5s Implementation 2.1 Seiri (Sort) 2.2 Seiton (Set) 2.3 Seiso (Shine) 2.4 Seiketsu (Standardizing) 2.5 Shitsuke (Sustain) 3 Conclusions References Availability Analysis of Shoe Manufacturing Unit Using Petri Nets 1 Introduction 2 Petri Nets 3 System Description 3.1 Assumptions for the Modelling 4 Petri Net-Based System Modelling 4.1 Representation of Dynamic Behaviour of the System 4.2 Performance Analysis of the System 5 Conclusion References Delamination Detection and Evaluation in Composite Laminates Using Guided Ultrasonic Waves 1 Introduction 2 Experimental Details 2.1 Materials 2.2 Methods 3 Results and Discussions 3.1 Delamination of Varying Extent (Length) 3.2 Delamination Defects at Different Depths 4 Conclusions References Development of a Systematic Framework to Optimize the Production Process in Shop Floor Management 1 Introduction 2 Research Objective 3 Research Methodology 4 Research Gap 5 Industry Description 6 Results and Discussion 7 Conclusions References Effect of Process Parameters on Machining of D2 Steel Using Taguchi Method 1 Introduction 1.1 Taguchi Technique 1.2 Work Materials 1.3 Electrode Material 1.4 Experimental Details 2 Results and Discussions 2.1 Plot for S/N Ratio 2.2 Surface Micro-structure of the EDMed Surface 3 Conclusions References Experimental Investigation of Water Absorptions and Charpy Test of Epoxy Composite Immersed in Different Aqueous Medium 1 Introduction 2 Materials 2.1 Fabrication Procedure of Test Specimens 2.2 Procedure of Moisture Absorption Testing and Evaluation 2.3 Charpy Test Characterization on Fabricated Sample 3 Results and Discussion 3.1 Water Absorption Test 3.2 Charpy Test Results 4 Conclusion References Four Wheeler’s Health Monitoring by Sound Level Measurement: A Case Study 1 Introduction 2 Description of Selected Vehicles 3 Test Results with Discussion 4 Conclusion References Green Manufacturing a Modern Era for Indian Manufacturing Industries: A Review 1 Introduction 2 Literature Review 3 Conclusion References Investigation of Fused Deposition Modeling (FDM) Process Parameters Influencing the Additively Manufactured Part Characteristics: A Review Paper 1 Introduction 1.1 Methods and Materials 1.2 FDM Process 2 FDM Process Parameters Affecting the Characteristics of 3D Printed Parts 2.1 FDM Process Parameters 2.2 Mechanical Properties of FDM Printed Parts 2.3 Part Quality Characteristics 3 Results and Discussions 4 Conclusions References Investigation of Manual Material Tasks Performed by Workers in North Indian Manufacturing Industries 1 Introduction 2 Material and Methods 3 Results and Discussion 4 Conclusions References Investigation of Tribological Properties of Stir Cast Hybrid Aluminum Composites 1 Introduction 2 Materials and Method 3 Results and Discussion 3.1 Wear Test Results 3.2 Wear Results Discussion 4 Conclusion References Investigations of Wear Behavior of Journal Bearing Materials 1 Introduction 2 Experiment Details 3 Results and Discussions 4 Conclusions References Metallurgical and Mechanical Behavior of Friction Stir Processed WE43/Nano-SiC Surface Composite 1 Introduction 2 Experimentation 2.1 Materials 2.2 FSP Setup Used in Study 2.3 Microstructure Characterization and Phase Composition 2.4 Mechanical Properties 3 Result and Discussion 3.1 Metallurgical Behavior 3.2 Mechanical Properties 4 Conclusions References Modal and Static Analysis for Analyzing the Effect of Loading on Crack Propagation Rate Using FEM 1 Introduction 2 Mathematical Formulation 2.1 Deriving Element Stiffness Matrices and Load Vector 2.2 Solving the Equation and Applying Boundary Conditions or Initial Conditions 2.3 Assemble the Element Matrices and Vectors 3 Finite Element Analysis 3.1 Defining the Problem: Pre-processing 3.2 Creating Three Dimensional Model 3.3 Selection of Element Type 3.4 Defining Material Properties 3.5 Meshing 3.6 Loads/boundary Conditions 3.7 Define Contact and Check Contact Element 3.8 Post Processing 4 Result and Discussion 4.1 Mode Shape Analysis 4.2 Loading Effect on Crack Propagation 5 Conclusion References Optimization and Validation of Material Removal Rate During EDM of HSLA Steel 1 Introduction 2 Material and Methods 2.1 Work Material and Experimental Conditions 3 Design of Experiments 4 Results and Discussion 5 Confirmation Run 6 Conclusions References Parametric Influence on Material Removal Rate of K-90 Alumina Ceramics During Zircon Sand (Abrasives) Jet Assisted Machining 1 Introduction 2 Experimental Procedure 3 Result and Discussion 4 Conclusion References Recent Development in Friction Stir Welding: An Advancement in Welding Technology 1 Introduction 2 Material Used 3 Temperature Measurement During FSW 3.1 Thermocouple Used for Measurement 4 Conclusion References Recent Trends in Weldability and Corrosion Behavior of Low Nickel Stainless Steels 1 Introduction 2 Literature Review 2.1 Literature Search Methodology 2.2 Weldability of Low Ni-based SS 2.3 Corrosion Behavior 2.4 Pre Weld Heat Treatment 3 Discussion of Study 4 Conclusion References Reliability Analysis—A Critical Review 1 Introduction 2 Literature Review 3 Discussion and Prospective 4 Conclusions References Shop Floor Productivity Enhancement Using a Modified Lean Manufacturing Approach 1 Introduction 2 Research Objective 3 Production Description 4 Implementation of Process Improvement Technique 5 Results and Discussion 6 Conclusions References Simulation Model for Productivity, Production and Cost Improvement in an SME 1 Introduction 2 Problem Statement 3 Action Plan for Development of the Simulation Model 4 Design of the Simulation Model 5 Results and Discussion 6 Conclusion and Future Scope References STL Generation from Point Cloud Data with User-Controlled Triangulation for Additive Manufacturing 1 Introduction 2 Literature Review 3 Terminologies 4 Methodology 5 Implementation 5.1 Developed Algorithm 5.2 STL Generation from Triangulated Mesh 6 Validation 7 Conclusion References Sustainable Green Lean Six Sigma Methodology and Application Status: A Perspective Review 1 Introduction 2 Integration Model of Green and Lean Six Sigma 3 Proposed GLS Implementation Framework 4 Current Status of GLS Implementation 5 Research Gaps 6 Conclusion and Future Research Agenda References The Effect of Gating System on Quality of Traditional Rural Metal Castings of India 1 Introduction 2 Background 3 Experimental Methodology 3.1 Design of Experiment 3.2 Experimental Procedure 4 Results and Discussions 4.1 Mechanical Analysis of Cast Samples 4.2 Characterization 4.3 Gradation by TOPSIS 4.4 Discussions 5 Conclusion References Tool Wears in Milling of Al/SiCp Composites by Dry and MQL Milling 1 Introduction 2 Materials for Experimentation 3 Experimental Design 4 Modelling of Tool Wear (Vbmax.) 5 Analysis of Results and Optimization 6 Validate Software Results 7 Conclusion References